Hi!
Please, can anyone infor me how can I get backup file of 4510 MCU by using serial terminal?
Or at least how can I extract my license keys with it?
Regards.
Hello,
Customer is going to deploy a new Collaboration infrastructure which incorporates Unified CM,Expressway-C & E, IM and Presence and Cisco Meeting Server cluster. I came across "CMS-Expressway-Deployment-Guide_X8-9-2" document which clearly st...
HelloI'm currently experiencing a situationSX20 at boot time, power button LED will turn redcheck user manual say this is Camera serial modeBut SX20 can't normal bootHow can I do to relieve camera serial mode?http://imageshack.com/a/img910/1033/lWd2c...
Hi,
A few things to ask below:
1. If you would like to setup a Spark Board, what kind of spark license package available to be subscribe?
2. Do you need proximity to run Spark Board with all the wireless devices (laptop, ipad, phone, etc2)
3. Wha...
Dear All,
I have SX20 telepresence unit which is registered to VCS, but I am planning to register it with CUCM, may someone tell me the advantage and disadvantage, please.
Thank you in advance
We are using an SX20 registered to a CUCM. Both ATC and VTC calls are registering as "video" calls. Is there a way the system can determine if it's an ATC or VTC based on dialing? The larger issue is I have to accept a Video before I place an a...
Can anyone please help resolve an issue setting up B2B calling thru Expressway X8.10 using the new RMS licensing? Scenario is as follows;
Spark Room Kit > CUCM > Exp-C > Exp-E > External B2B SIP Endpoints
There are RMS licenses installed on the ...
This is a potentially silly question, however;
The TMSXE Scheduling mailbox allows users to add dial-in participants etc to a meeting. This can also allow users to schedule MCU resources without needing to book any actual Telepresence rooms. This...
Hi all, we have an SX20 unit which was working fine as stand alone, then we bought BE6000S and wanted to connect the SX20 to the BE6000S. however the next day when want to start the configuration, we can't access the SX20 thru web even though there ...
Hi all,I will implement a Cisco Telepresence ISDN Link with SX20. The Scenario will be:4 BRI Euro ISDNIP infrastruture with static IPNO VCSIt will be possible to dial IP and ISDN video Calls.The isdn admin guide does not contemplates this scenario, a...
I deployed a CMS with CUCM. CUCM is 11.5 and CMS is 2.0.
Meet me Meetings are shut down after 15 minutes. Users dials number 550001 are placed in meeting.
All is good. At the 15 minute mark meeting shuts down. Any idea on what would be the cause...
The screen mount kit is part of the Cisco Spark room Kit. Is there any idea to have the Cisco Spark room Kit PLUS used / installed as screen mount devices? Is this supported with some VESA material?
Hi everyone!
I'm wondering if anyone has enough experience/knowledge with the VCS platform to help me figure out how to get out of my current problem...
Basically we have a VCS-C/VCS-E in place. Codecs in the main office register to VCS-C, code...
Team
Please help me understanding if i still need external ISDN Gateway for ISDN Video link calling using the CMS ?
Or CMS has inherit feature of supporting this ?
regards
sabir
