TelePresence and Video Infrastructure

Hi,   We have two SX80s running CE8.3.4 with CUCM 9.1.2.13900-10. Calls are working just fine, except that we cannot seem to pass DTMF tones on any call inside or outside of our network. We just inherited support of these devices, so I am not super f...

We are using SX10 codec & we need to use a balance line signal out from Biamp Nexia DSP as a Mic input to this codec. We are connecting 3 mics in Nexia DSP & mix Balance out will go to Mic In of SX10 codec for far end participants.  The 4 pin connect...

We have TMS 15.5.0 Cisco Meeting Server  2.3.2   Overview of my request:   I schedule a video conference in TMS Email is sent. Email contains Connection instructions which include the Meeting URL and conf_ID (VAL:WEB_CLIENT1_URL).   I list all video ...

Hi, a customer requested a configuration in basic HA using CMS 2.3.3 and VBrick Rev + DME. The desing includes 4 servers for CMS (2x with callbridge and other two for recording), 7 servers for VBrick Rev and 2 for DME. The customer want VOD and live ...

Hi everybodyI would like to create a video conference by using the Telepresence ServerHere is the backgroundA.CUCM 10.5B.Telepresence conductor x3.0.3C.Telepresence server 4.1(2.33) - VM- Enabled: Virtual machine activation- Enabled: Encryption- 5: S...

Hi, If i connect 2-3 mics to the sx80, can i mute only one or two of them? Thanks, Shy

Do versions of VCS 8 and above demand a VM? Will the new VCS-Expressway-C and E behave like the VCS C/E do today?  Can configuration files be ported over?  Licenses? Thanks Docs seem to say different things depending on what doc you look at.

Does anybody know if it's possible or supported to use CMR Hybrid with WebEX Event Center?Using it with Meeting Center is nice, but it would REALLY be nice to use our Telepresence equipment when having a large WebEX event.

Big picture: TMS 15.5 with SQL on the same Windows Server 2008. Server is in UK Need to move to new Windows server 2016 servers, with TMS, TMSXE and SQL being on separate VMs in the USA.   Question: All of the documents I've found seem to be very dat...

Hi Experts, I need to confirm for an information about CUWL standard license on latest version CUCM 12. Previously on version CUCM 9.x to CUCM 11.0 we were able to add 10 devices for a single user with different Directory Number. Now can we do the sa...

Anyone can shared how to setup TMSXE with exchange (o365)   for TMS and TMSXE need to internet access ?   Could you provide architecture ?    

cannot configure the recorder.   its a separate VM. only trying to configure recorder. no webadmin no callbridge no xmpp no webbridge. Only recorder in this VM nothing else.   i was trying to remove selfsigned certificate. I generated CSR file.  crea...