TelePresence and Video Infrastructure

Expressway and Jabber

I am deploying expressway-c and expressway-e for a couple of jabber users and would like to know what services that I need to select on the e and c servers. This is bundled with my BE6000 CUWL licenses. What is the difference between the following: ...

Collecting RTP statistics from DX-80 via http feedback (CE8.3)

We are trying to collect RTP statistics such as jitter, packet loss and latency from our endpoints. Http feedback works partially. We would like the codecs start posting us RTP stats for the ongoing calls as well. Is that possible? Following is our c...

collaboration sx10

hi, we have installed sx10 video conferencing device in mumbai office and another at delhi office. we have also installed simultaneosly a project with a projector screen in mumbai office and running poweroint presentations. my question is as follows...

Shoretel VOIP QOS, auto or policy

We are preparing to evaluate a Shoretel VOIP system. I was wondering about QOS, what is the easiest /best setup is for a none Cisco phone: Auto QOS or policy/profile? I will be using LLDP. The design will use 2960s-48 POE flexstack switches and 4506-...

Cisco Telepresence SX20

In setting up SX20, is there any consideration for assigning IP address? The only requirement that I see is that it needs to be static IP address. Is there any other things that I should be aware of or to consider? I was just thinking of assigning...

NO HTTP RESPONSE

Have an issue with some of my systems on TMS that I am receiving more No HTTP Response warnings. I verified HTTPS is running properly on TMS and I have the SNMP and HTTP off, and HTTPS set on for the endpoints. No firewall involved as systems are a...

OPENSSL SECURITY ISSUE

I have systems running various firmware versions including: F9.3.4 (MXP Series) TC7.3.X (Series) CE8.2.1 (Series) X8.8.2 (VCS) X8.5.1 (VCS) 4.5(1.71) (Codian) 4.5(1.89) (Codian) J4.7 (MPS) 2.0.1 (Acano/CMS) We have been directed to upgrade SSL to cu...

CMS CALRIFICATION

Dear All, I am implementing CMS for the first time, i need some clarification on configuring: Customer Existing environment : 27x C40,Old Endpoints MCU 5310 with 5 HD Ports Old Registration VCS 20x Non-Tra Calls, 100x Tra Calls,H323 SIP Old Conferenc...

REMOVE 64BIT BLOCK CYPERS

Does anyone know how to remove the 64bit block cyphers from the MXP VTC systems. We have to remove the from the /etc/ssh/sshd_config file ?? Also after doing that will I still be able to remote (SSH) into the system ? Telnet is a no go.

Point to point call between sx10

Hello, is it possible to place video call between two sx10 without cucm/vcs systems? Thank you in advance

Profile 55" Audio Issue

Hi.. We have a Profile 55’’ Single screen system. We are not getting any audio output through speakers integrated in display unit. We have checked the Codec output by connecting external speakers with codec and its working fine. Now we are sus...

MX300 second mornitor

Hi team, would you please help me, i have a Cisco Mx 300 and the client need to connect second mornitor for the presentation but i did some configs and still not signal on the second monitor, can someone help how to do the comfigs please help..

SX80 anonymous SSL ciphers

Hi, Is there a way for me to disable support for Anonymous SSL ciphers on the SX80?

MX700 kernel: loop: Write error

Hello, One of my mx700s during the call does not receive or send more audio even if it is not lost. In log peripherals.log I found this error repeated 2017-04-26T15:45:44.147+00:00 SalaPresidenteLitta E4:AA:5D:A2:53:C1 kernel: loop: Write error at by...

CP-DX80-K9 vs CS-DX80-K9

Good morning I want to know which are the differences between both DX80 endpoints: CP-DX80-K9 and CS-DX80-K9?

TelePresence and Video Infrastructure

Forum Posts

Expressway and Jabber

Collecting RTP statistics from DX-80 via http feedback (CE8.3)

collaboration sx10

Shoretel VOIP QOS, auto or policy

Cisco Telepresence SX20

NO HTTP RESPONSE

OPENSSL SECURITY ISSUE

CMS CALRIFICATION

REMOVE 64BIT BLOCK CYPERS

Point to point call between sx10

Profile 55" Audio Issue

MX300 second mornitor

SX80 anonymous SSL ciphers

MX700 kernel: loop: Write error

CP-DX80-K9 vs CS-DX80-K9

Get ready! Great things are coming to Cisco Community

New name, same great product: Cisco Spaces

Congratulations to the July 2022 Spotlight Award winners!

Room Kit activate standby by one click on touch10

WebEx Room Bar - USB-C dual screen support

P60 Audience Camera Sensor Malfunction

Cisco Webex Codec Pro AD for centralized authentication

CMS - What causes the bad presentation quality? (Example attached)

RTMT versions 12.5/14

Connecting Laptop to cisco Deskpro using USB A to USB A

Webex Room Kit - Audio, but NO VIDEO in calls between endpoints

Webex PTZ 4K Camera Accessories

How register a Videoconference on Expressway from a external network?