TelePresence and Video Infrastructure

Hello, We configured CMR Hybrid deployment in my setup,  Cloud Webex (WBS30) ----- TMS 15.4 -------HTTP ---- CUCM ---- SIP --- Jabber client/MX800 We scheduled the meeting on the outlook (1xWebex Participant , 1xMX800, 1x Jabber for Windows). Senar...

Good Morning, I have an MPS 800 with software version J4.7, periodically we would remotely reboot the unit to clear out the cob webs, say every two weeks for the last 10 years.  Lately, we can't reboot it, because when we do it shuts down and it doe...

Hello, Is there a SNMP MIB related to monitor the registration of the following devices over TMS: CTS1000/C20/TX9000/CTS3000/MX700 -Kevin

hi all ! the device image of  sx endpoint end user manual is pool in cisco web . who has better ? thinks .

Having an interesting problem. Outbound B2B expressway-E calls working fine both audio and video. Inbound we get video no audio. ALG has been turned off. Expressway-E has public address, no nat.   Anyone seen anything similar?

Hello all, I need you input regarding a design question from conductor with 2 CUCM clusters. We have a running solution with 1 CUCM cluster + 1 Conductor + 1 vTPS.  This is setup as per cisco design documents and we have 2 SIP trunks (1 for Schedule...

Is the SX20 series compatible with HDCP?

Greetings, I have a Cisco C60 running TC7.3.6 code connected to a NEC display with 3.5mm audio out of the display to a small amp powering 2 ceiling speakers. I get a buzz or hum on the speakers. I first thought it was the speakers or amp. But the buz...

I need to change the presentation cable in sx20, the current is DVI2VGA and I need the DVI2HDMI, do you know where I can buy it? or what is the cisco reference? Thank you.

Hello together, the best way to provide address books to telepresence units is the TMS. But is there a way to access these TMS phonebooks from the Cisco Jabber? Kind regards