Hi Guys, I have a VCS Expressway X8.10 with dual NIC static NAT configuration. Currently the default gateway points to the gateway on the internal interface. The Cisco config guide says to set static routes pointing to management devices to the...
Forum Posts
We are running Cisco TMS version 15.13.3 and its running very well and has for many years.TMS Login/Authentication is using IIS and Integrated Authentication to use our company login credentials for TMS Login.Recently there has been a push for MFA (M...
I have a room setup with a Webex Room Kit Pro or a SX80 and 3 monitors, these monitors are directly connected to the Codec.(SX80 is running ce 9.15.13.0, this unit I'm using for testing) At the HDMI Inputs of de codec we have; HDMI input 1, Cisco Qua...
Resolved! Audio in Quad Cam Speakers
Hello,I can't seem to find the right setting to have audio through the quad cam speakers. I have a codec plus, HDMI input 1 is used for the camera, and from what I read, audio in supposed to go to the camera through that same HDMI connection, Is ther...
failed registration between SSM-on prem and expressway with reason:Failure reason: SSL: no alternative certificate subject name matches target host name 'CCSSMS.bfegy.com'I have assigned a cert for SSM and uploaded it to EXP's trust CA.but it shows t...
Resolved! Cisco VT Camera Driver
Hi Guys, Need an help regarding Cisco VT camera Driver download? I searched in cisco website it takes me no where, can u guys please help me out with this.I got the camera with me, but no driver cd? What can i do with that?...ThanksCheers,Hari...
Hey guys, is it unhealthy for the Cisco Codecs to actually turn them off during the weekends? We have set up the standby mode on every device but one of our clients would like to turn off the device completely in order to save electricity, so my ques...
Resolved! Find E20 firmware above TE4.1.0
Hi Everyone Who has E20 firmware above TE4.1.0?Thank you very much!Thank you very much!Thank you very much!
Resolved! Create Multiple Admin Users
Sorry for the newbie question here. I have a couple dozen Cisco video conference (Room Kit Plus) units that are managed by CUCM and using Expressway as the SIP proxy. I want to create a new admin user with the same credentials on each Room Kit Plus...
Does anyone know how to assign "user URI part" from a range 2000 to 2099 for the LDAP sync user's cospaces? is it possible using coSpaceUriMapping? the value 2000 - 2099 is not available on LDAP to fetch. any ideas?
Hi all,my ssd in D9902 MK2 is dead. Do you have any idea if i can replace old ssd with any olther ssd? Or it must be ssd ordere from cisco with preinstalled system?I found some replacement ssds on ebay, but they say they are empty....How to install a...
Hi. How can I make RoomKit Plus codec not switched to the sleep mode.(the codec must remain active no matter what). Thanks
Resolved! CS-DESK-LE-K9 Wifi details
Hell All, for local reglementation, i'm asked to present all WIFI details of CS-DESK-LE-K9: used frequencies (GHz) and power (dbm). They ask also for bluetooth. If anyone have a link or a document with thoose details i'm very grateful. NB: We need de...
Any one out there have a URL to get the latest CISCO Telepresence Stencils i.e. WEBEX series, C220-M5 etc servers, CMS, CMM and TMS and peripherals? Latest download on the CISCO site I noticed is 2013 ?? Thank you.
Hello,is there a way to hide the camera button for entering the camera controls on the Webex Room Navigator? I deployed a Room Kit Pro with a Room Navigator and a Crestron touch panel for input source selection, controlling the lights etc. Additional...
