Hi, I am trying to install Cisco TMS 14.6.2 on windows 2008 R2 server. Getting the following error when installing. Any help please. i have installed .net 3.2 Thanks
Hi, I am trying to install Cisco TMS 14.6.2 on windows 2008 R2 server. Getting the following error when installing. Any help please. i have installed .net 3.2 Thanks
Hi, I was wondering if there was a quick and easy way to find out what generation a codec is on a CTS device? Thanks
Hello,Is anyone aware of a timeout feature that can be set on the VCS-C or VCS-E's? I checked out the calls on the VCS-C while looking into another issue and there was a call that said it had been active for 3 days, over the weekend... I am not sure ...
The Far end video is Freeze on TV in chair person. The all other part of video is clear but , face is blurs in conference.we made a conference through MCU , more than 35 participant present in single MCU , there is issue only in main chair person TV ...
I'm not sure if I'm the only one who's seen this problem, but I noticed that trying to upgrade a C-series endpoint from TC6.2 and earlier to TC7.3, the upgrade gets hung on Installing post hooks from install pkg. I've had to reboot the codec manuall...
Software update successfully. How to insert new upgrade key ?
I have a client looking for TMS to send an email after a conference is completed telling them which codecs did and did not connect. We are using this to test carts that are supposed to be online 24/7 but keep getting unplugged. We have setup a reoc...
GreetingsI am getting a connection failure when I configure TMS SSO. All of the backend WebEx site work has been completed including partner delegation.I have uploaded the certificate onto TMS without issue (including password). What I am a little co...
Hello - We have a TelePtresence SX20 and a Cisco ISDN Link box. Does anyone know if the ISDN Link box is capable of supporting two TelePresence video systems through the video port using some type of switch or splitter? Only one TelePresence video...
Using the HP Digital Display port on the 9470 laptop, I'm connected to a DX70 using a DD port adapter to HDMI cable out of the laptop to the HDMI In on the DX70. Unable to get the DX70 to "see" the laptop or use the DX70 as a second display or for c...
Hello Guys; We have ex90 video conferencing endpoints at far location which we use our weekly meetings and ıts version is 5.1.3. We have one mcu to use at our meetings and ıts name and version is mcu 4210 4.5(1.55). We use this mcu joining 30 locati...
when an endpoint has encryption enabled does the encryption utilize significant bandwidth? If so does it sit 'inside' the parameters set in the the VCSC or 'ride on top' ?ie - if the VCSC is set for a subzone max call rate of 768k does the encrypti...
I've been tasked with doing research on hardening a Cisco Expressway Edge server. I have not seen the server yet, but I understand it was deployed with the dual nic deployment method. I wanted to see what are typical hardening best practices. For ...
Hi,Our client's TMS needs an upgrade, the upgrade path are as follows (From Cisco Engr.)1. Upgrade to TMS 13.22. Migrate legacy TMS agent to TMSPE3. Upgrade TMSPE to 1.14. Upgrade TMS to version 14.2 Questions:1. Do we need a separate server for Cisc...
Hello,I looking for any documentation that talks about best practices for standalone video endpoints, i only found Cisco Preferred Architecturefor Video but always have Expressay C and E.I want send to a client some info, whats better put the endpoin...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-26-2024 08:22 AM | ||
04-25-2024 05:00 PM | ||
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM |