Hi Experts,Would it possible to edit the E20 video phone by remotely. If yes, please instruct me the procedures.I'm waiting for your reply. Thanks in advance. RegardsNizam Ahmed
Hi Experts,Would it possible to edit the E20 video phone by remotely. If yes, please instruct me the procedures.I'm waiting for your reply. Thanks in advance. RegardsNizam Ahmed
I could successfully do unicast streaming of the TP call using TCS with windows media server. I have done a similar configuration for multicast streaming in TCS and windows media server. I am able to get the multicast publishing point started with ...
I am planning to order the appliance model of TCS (TCS-C220-PROBUN-K9). But the requirement is to have more than 2 TB of Hard drive in this server. Appliance model comes with 600 GB of hard drive capacity (2 x 600 GB in RAID 1). I would like to ad...
Hi All,We have recently deployed a BE6K for 200 users with VCS Control/Expressway, a single Telepresense Server and Telepresence Conductor Essentials. We have full B2B point-to-point and ad-hoc conferencing working without any issues. I have read a n...
Need any troubleshooting suggestion:TMS running on 14.3.2See attached page.Was seeing and collecting call stats until about a week ago and now not seeing any calls from CDR endpoint details???Systems are connected via Https to TMS all normal ... don'...
How come with this unit it is necessary to go in and assign different values on multiple instances just to be able to have a mirrored presentation? Isn't this what the layout function should be doing? As is you have to interrupt a meeting and go thro...
I am running EX60 with TC7.2.1 and I see this issue on multiple systems.I have a known good NTP IP address added and get the following error."NTP is not correctly configured. If the system clock is not correctly configured, certain features (e.g. enc...
I have an SX 20 that is sending content audio to the far when share content is NOT selected.Also, I am not sending content video when share content mode IS selected. Yes I'm sending video to the input and Yes the 2nd input is set for content and the ...
Is there a link to find out what are the various option keys available to MXP, EX, C, SX, DX, MX series codecs/systems???Also what the feature is for the key. Ex: I am looking for the definition of the "multioption" key for the systems vs. the "mul...
Hi all,Do you any idea or experience regarding the memory usage on VCS-C (VM Deployment)? My Client VCS-C was keep using around 5.2~5.3G out of 6G. Does it normal? or any document talked about this?Thanks!Daniel Cheung
dear all i have SX-20 and want to use it as a stand alone and want to know how the jabber client that is registered with my call manager will call it and how it will call my jabber client ? and there is no sip proxy if it will register sip and...
Dear ALLI have Vcs-C 7.2.2 & Vcs-E 8.5.2 & TMS 14.6.2 & CUCM 10.5.2 & WebEX wbs29 no CMRCan I build webex hybrid?Do I need buy webex enable cmr?
Hi, Our client is running version 13.2 of TMS with TMSXE and TMS Agent. They are running this on Windows Server 2008 R2 64-bit with SQL Server 2008 32-bit. We would ultimately like to get them upgraded to TMS 14.6 and migrate the database to an exter...
We have an SX80 installed. We have a RGB HV signal coming from the lectern into a splitter and is routed to a crestron unit and the codec. When we display the laptop in the room, locally NO vtc being used, it appears fine. When we connect to a jabber...
Just curious approximately how long it takes to Migrate from a 8510 to an 8710 or MCU 5320 to a Mulit-party media 320?I'm referring to this process.http://www.cisco.com/c/dam/en/us/td/docs/telepresence/infrastructure/ts/install_guide/Running_TS_Softw...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-26-2024 08:22 AM | ||
04-25-2024 05:00 PM | ||
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM |