TelePresence and Video Infrastructure

Hello Support Team, I need different users in our TMS Server for booking.So this is no problem and is working fine. Each user should be able to book all systems.But only to edit and erase meetings which were created by this user. In the moment we hav...

I recently uploaded the cop.sgn files for C Series endpoints into my CUCM.  I can see it has populated the device defaults within CUCM.  I haven't reset the TFTP services on CUCM but instead just rebooted one of the endpoints to see if it would downl...

I'm having problems enabling TLS on my SIP trunk from the VCS to CUCM.The SIP trunk shows active on the VCS, but I can't make calls from VCS to CUCM or from CUCM to VCS.Before configuring TLS, I was able to make these calls.With TLS enabled, the VCS ...

Dear Team,I am not able to control for camera by remote and even on display self view is also not viewable.On camera top the amber color light is blinking and at the bottom of the camera.Cisco SX20 4X and its a new one.Please friends

We have a scenario with SX20-CUCM-ExpC-ExpE.If we make the call from SX20 to outside( we are using linphone to test) it's working fine, but making the call from outside to SX20 the call drops after 20s.Any clue? Paulo Ferreira

Hi, We want to access the CTS Codec over http without being redirected to https. Is there a way we can disable redirect or disable https itself. Any suggestions would be appreciated.

I was wondering if someone out there had a link to a tempory license key for a MultiSite License for the SX20.  License part # is LIC-SX20-MS Thank Paul Linehan 

SX-20 - How to display presentation on both screens when TP is not being used?? When TP is not being used we would like presentations to be displayed in both screens. When we go to presentation mode and click present on the touch panel presentation i...

I am trying to set up a combinable space utilizing an SX80 and a Precision 60 in each room.  When the room is combined, I want the main codec to use the other camera as camera 2.  Is it possible? I have both cameras on a switch linked to port 2 of ea...

Hi, since version TMS 14.6 or so, the date is not shown in the confirmation email. The TAG <VAL:MEETING_DATE_TIME>  used to tell us the Start date and time + length of the meeting.Now  in TMS 14.6 it will only  show start time + lenght,   not the dat...

 Dear Members, One of my client need a Router and having following requirement. Other requirements meet with Cisco 2951 router. Management/ Logging: CLI, WebUI, SNMP (v1, v2), Syslog, Forwarding External, up to 4 servers Standard & Custom MIBs, Ping,...

Tengo un cliente con un sitio central y cuatro sitios remotos, quiero una solución semejante al Cisco Telepresence SX20, pero el inconveniente es que el SX20 tengo entendido sólo sirve para integrar hasta 4 sitios y yo tengo 5 sitios.Al SX20 se le pu...

Hi,May i seek your support regarding external box  KV 19 encryptor if it is compatible with SX20 of later firmware. Also, if the said encryptor can provide functional interoperability with  Cisco IP Phone of any model.  Please see below link for deta...

Hi,  we bought PrecisionHD USB #CTS-PHD-CAM-USB= to connect to Telepresence Codec C40, does any one know how to make this work?

Dears ,Have few questions about the Video conference infrastructure , we used to do systems with VCS,TMS,MCU but now all i see that CUCM is involved soo : 1- is the CUCM considered to be a replacement for VCS , does it support h323, does is support n...