TelePresence and Video Infrastructure

I noticed a change in IOS Gateways in how it deals with anonymous calls.  Anonymous calls in version 12.4(25g) generates an SIP INVITE:From: "anonymous" <sip:6172589132@18.255.255.29>A anonymous calls on version 15.1(4)M8 generates a SIP INVITE:From:...

We have installed one Cisco SX20 VC in our office last week only. Since then we are receiving auto call with name Cisco with no ip address. Everyday approx. 250 calls we are getting on VC.VC Network Configuration: Configured with Public static IP add...

Hi,at the moment I am setting up a new video infrastructure. All components have the lateste software.- SX-Endpoints are registered to CUCM- CUCM has SIP trunk to conductor- Ad.Hoc and Rendezvous conferences are working- TS is managed by Conductor- S...

Hi All, there is a  problem i am trying to register DX80 with CUCM 10.0, i have uploaded the COP file for DX80 but still i am unable to see DX80 in the device list.how can i register cisco DX80 with cucm.

Hi All, Is anyone know the link to download virtual edition of telepresence servers(VCS-E & C, TMS,Content Server,ISDN gateway,Lync Gateway)? I had gone through the cisco webside and download center but no where found the same. Thanks in advance BRYa...

Hi All, I was looking for some documentation on integrating TMS(13.1) with CUCM(8.6), I would also like to know about the integration of TMS with Microsoft Outlook for the purpose of meeting scheduling and OBTP functionality.Any information on the in...

cisco jabber internal --- EX 90----- video not workingcisco ip phone 9971-----EX90--------Video Not workingdx 70 -Ex90------ Video workingAudio is working fine on all the devicesBoth cisco jabber and DX 70 in same device pool, Both are registerd to c...

I have vcs expressway in our dmz, vsc controller inside (X8.5.1), to mcu 5310 on 4.5(1.55).External Polycom HDX calls work fine, but if they come in Polycom Group 500, we receive video but no audio, and there is no audio or video out to the external ...

I am having an intermittent issue between two of our SX20's and our 4515MCU.  Sometimes when the calls connect we not getting any video to the SX20 from the MCU.  Whenever this happens I see the following in the MCU log:11514011:55:05.435 H.323Warnin...

Hi, we are considering the use of Cisco Telepresence TCS + TMS but have a mandatory requirement for safety marks / hashes / (whatever) in recordings so they can have legal force. In the docs I didnt found any info about this subject. Can someone help...

I just finish connecting my SX-20 and now I need to call some one out of my net work so I know its connected correctly. All I need is a number to call to connect my telepresence.

Hello,I check the specs for the SX-20 that we already integrate with an external micrpphone mixer and work well. It tell 1/8'' 4 contact.On the specs of the SX-10 there is also a 1/8'' 4 contact but they add ( only Cisco TelePresence Table Microphone...

Have Cisco Emergency Responder ver System version: 8.6.1.10000-9. It suddenly stopped sending emails but still sends the voicemail notifications via the same smtp account. Looked at this but was unable to get any results from it:http://www.cisco.com/...