TelePresence and Video Infrastructure

Hi all,We have an ISDN Link which is hook up to our SX20.we are using ISDN30 "PRI" and IP connection for this. The problem started 3 weeks ago that suddenly we cannot connect to any ISDN numbers that we dial from endpoint. As i had checked the settin...

We have a MX300 (with firmware 7.0.2) and a beamer in the same room. We want to connect a HP 8570p with Intel HD4000 graphic card with a VGA splitter to the two devices  mentioned above. If we connect the laptop seperate to the beamer or MX300 everyt...

I have a 60" TV right next to the Cisco EX90.  How do I get the video-caller to be displayed on the TV rather than the Cisco screen?

I’m happy to announce that Cisco TMS 14.5 is available. Please read the external release notes for more details. TMS 14.5Download TMS 14.5, click hereRelease notes, click here /Magnus

Hi, I am facing a strange issue here. We are ruinning the CUCM 7.1.3.When the phone rings to our office and we answer ,there is a noticable delay before the connection is actually made.This causes the person on the other end to not hear the first par...

Is anybody successful in getting CIPC 8.6 registered while connecting via Juniper vpn client? Regards,safeer

Hi Team,we have SX20 & ISDN Link, I have done all configuration in SX20 & ISDN Link  but when i search the device in SX20 (peripherals option) for making the pairing between both system than sx20 shows that "No device detected" so i need to your expe...

Dear AllBeing so happy that i finally managed to make my C2600 with FXO-M2 ports understand the disconnect tone of China Telecoms/China Mobile I would like to help others also.Unfortunately cptone cn never worked for me correctly, letting the hook of...

I am attempting to connect a Linphone 3.7.0 soft client to a Cisco MSE 8710 bridge, but the session times out after 45-50 secs over the Internet and can take up to 10 min. on the corporate VPN (but video is never received).  I have configured the cli...

I have a Cisco Touch 8 tablet that is connected to an MX200 (G1) and we would like to install a handset to use for privacy. The tablet has the same connector like an EX90 handset but when we connect it to the MX200, it does not seem to recognize that...

Hi All,Is there a way to make the ics attachement in the email sent by TMS for meeting bookings be in an HTML format so it looks the same as the email that that holds the attachement?RegardsEdward