Can i use the SX20 Touchpad on an Edge 95?
Can i use the SX20 Touchpad on an Edge 95?
Is there any way to manually create an address book and upload it to an EX unit? I have a client that does not deploy TMS but wants to deploy phone books, this is how I have advised Address books are managed. I was trying to extract the file and edit...
I have 10 SX20 with tc7.1.3 firmware registered on one Server VCS starter Pack X7.2.2.I need help if somebody have an idea about how to backup the Local Contacts Management and restore it on another SX20 since I have many users to create.I have only ...
Hello, I have a VCS Control and VCS Expressway, calls between registered devices including working properly. The problem when I want to call cisco example, do not know what settings should I add to be able to call someone who is not my domain or ...
Hello everybody,We have a problem. When we install the CTM, according to the document configuration EXCHANGE 2010, but found it was wrong status of telepresence endpoints in CTM. we checked the logs, the reason was CTM did not get the data from AD an...
Working on a TMS (14.3.1).Previous admin configured certain phone book sources to push every 24 hrs.Admin was removed from TMS users - Windows Server account still remainsEmail alerts for his failed phone book source push attempts are now forwarded t...
Hi I have a tms ver 14.3.2 an i try to locate How to Change the time zone . whan i go to Administration > general setting > it need to be under the tms release key but it is no showing there . i attach a print screan . It start Because my smar...
Hello all, I have a setup with CUCM 9.1, VCSC 7.2 and ISDN GW 3241 (2.3). I have created a SIP trunk. Between CUCM and ISDN GW. Voice calls are working fine but if I do a video call (I see the 6 b channels up as configured for 384k), the call setu...
When i'm in a video conference and i watch shared content, the video feed is shown in the left lower corner. I can drag it around over the screen but it's always there. Would it be possible to build version of Jabber for Telepresence in which i can s...
Hi all,I have the following setup:CUCM 9.1.1 - SIP trunk to VCS Control,VCS Control has a CUCM Neighbour zone, and a Conductor Neighbour zone.I have a TelePresence Conductor 2.2 with a managed TelePresence Server 310.Conductor is managed by TMS 14.3....
Hi there,I have a customer who has an SX20 quickset, and is having problems with pairing the Touch 8. The codec and touch panel are both set to static IP addessing on the same vlan. When trying to pair, the TP cannot find the codec. However, if he pu...
My freinds, I need Help in this case, we replaced digital phone with new EX90 for our General Manager. but there are some features was exists on the old phone:1- the old phone has buttons around the screen as a speed dial buttons for some Employees n...
Wondering if anyone can inform me if the latest version of TMS can register the Polycom Group 500 series?ThanksAnthony
Hi folksI've been asked to set up a Cisco E20 as part of a 'virtual receptionist' project: it will be located in the foyer of one building, but the 'real' receptionist will be in another building.The plan is that the customer places a call from the C...
Hi,We have few conferences setup on the 8510 blade. Each conference has the main PIN and the Guest PIN configured. When I dial into the conference, main PIN works fine but the guest PIN doesn't work.I tried dialing in with the PIN from one endpoint, ...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
03-28-2024 08:12 AM | ||
03-27-2024 06:24 AM | ||
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 09:29 AM |