Hi All, Whilst carrying out tests with CMM I have noticed in the "Meeting" interface there are checkboxes against the participants under the participants list and in the "checklist - scheduled participants". But they don't seem to do anything? Can so...
Forum Posts
I have a customer who is using the WebEx Room Kit. We used it on a WebEx call and the audio was very clear. He then called me from the Room Kit to my Jabber (I am using the same headset and all except not on a WebEx call) and I can hear him and wha...
The PrecisionHD 1080p 4x S2 camera when connected to the SX20 equipment does not display the image. The camera starts and shows the LED on and the initial movements. It also responds to commands from the remote. However, it does not display an image....
We are attempting to architect the following - bilingual video conference - 2 C60 (English, French), TMS, VCS-E/C, MCU 5300.English video conference with external participants (mic input from English translation)French video conference with external ...
Is it possible to create macro/button to protect access to the codec Touchpanel (Touch10 & Room Navigator) by a PIN or password?As far I know you can only add buttons to the main screen - you cannot remove existing ones.
I have a webex room kit mini in my office and the issue is that whenever i trying to share something via hdmi placed on table cable cuby the touchpanel of room kit mini automatically goes on sharing mode. So, please help me in that.
Hi. I was wondering if you can use the SX10 to call on LAN to another SX10 using either SIP or H323 protocol? If so then can someone help me out on the setting? Thanks you
Hello Folks!Just wondering if any one came across this issue before;My client has a Webex Plus Codec with 2 P60 cameras connected to it via RJ45 which is connected via a Small TP-Link Switch.And the HMDI connected via Crestron NVXs. Every time a rebo...
Hi guys. I just started to get into Cisco video conference system. So just want to know does cisco room kit pro can support 3 cameras? 1 quad camera and 2 P60 camera. As I see for the diagram it only show 2 camera input ports and 2 camera control po...
I am experiencing some occasional Telepresence Sound Check errors from a few different Telepresence Room Kits. The soundcheck produces the test tone music, which can be heard. At the conclusion, sometimes it indicates a successful test, other times i...
Hi Team, When some one has shared screen during VC and i want all participants video turn off, how can i do.
I have an EX90 using SIP that drops every 15 minutes during a VTC. Everything works fine but after 15 minutes it drops. What is the root of this issue? Could this be a firmware issue? I am using version TC 7.7.7c84180a. What is the latest firmware an...
Hi guys: Dual-display MX700,when standby, the left screen can be completely extinguished, but the right screen cannot be completely extinguished, and the background color is still retained,it will go off 10 minutes later. Note:this left moni...
Dear All, I am preparing a lab for CMS on my laptop using VMware work station. I have installed the CMS server and i have been able to login the CLI of the CMS server. Now i need to access the CMS through GUI, i mean webadmin for CMS. I would appreci...
Resolved! Webex Room Devices webRTC
Hi there. Can I confirm which ports the devices use for webRTC? Do they attempt to use UDP? Mainly thinking of Teams. I only see TCP traffic at the moment
