TelePresence and Video Infrastructure

Hello,We have a issue where NTP has stopped working on our internal VCS Control, we do not have a internal NTP server so we use the public servers: 0.uk.pool.ntp.org, 0.europe.pool.ntp.org etcThese addresses always worked and no matter what public ad...

Hello Everyone,I'm having problems connecting video over a cisco voice gateway. I attached the debug ISDN. Can someone helpme?I'm seeing some important, at least looks like, logs at 16:53:31.009.Regards,Felipe Braga

I have a SIP trunk provider that requires me1) to always use my account name in the "From" header, so I have to use header header rewriting to achieve this2) to set the "P-Preferred-Identity" header to change the caller id (as From cannot be used due...

Well need some help here.  VCS running X7.21.  VCS was configured for primary cluster.2.  Had Database Failure indication in the clustering section.  3.  Deleted fields in clustering page saved and restarted VCS4. After restart had resources = zero a...

I have a juniper EX4200 and i connect CTS 500 on one port. I tryed to get a vlan voice for the ip phone and vlan data for the pc. I have to use LLDP on the juniper because of course CDP is not available :-) During the test, i notice that all the equi...

Dear all,The codec C40 has obtained the TMS global phonebook.We would like to know any commands to obtain the TMS phonebook from the codec?Best Regards,Benjamin

Hi Cisco team,I would like to give a suggestion regarding Cisco VCS Expressway. I want to suggest Cisco to provide some kind of troubleshooting guide for the VCS Expressway. I began to participate in this community few months ago and since that, I ha...

hi All I made a Camera Control Cable  RJ 45 to D Sub. i face some issue ,   when i control the Menu Via Cadec it,s wording fine  but when i control the Menu via a Camera  only camera move  menu not working. Yasir Vistro

Sometimes I can hear a clicking noise from the ex60. I just wanted to know if this was normal or if something is broke inside. It will sound something like "click, click, click" very faint. It almost sounds like a motor is turning something.I believe...

I've recently upgraded TMS from 14.2.1 to 14.3.Since the upgrade, I've been having issues booking internal point to point automatic connect conferences.We have our "Use MCU type in routing" set to "Always, except point to point".When we schedule a co...