All,Do I have to enable SNMP on any Polycom for it to work with TMS? Thank you, Justin Ferello Technical Support Specialist KBZ, a Cisco Authorized Distributor http://www.kbz.com e/v: justin.ferello@kbz.com
All,Do I have to enable SNMP on any Polycom for it to work with TMS? Thank you, Justin Ferello Technical Support Specialist KBZ, a Cisco Authorized Distributor http://www.kbz.com e/v: justin.ferello@kbz.com
All,What version of SNMP does TMS use between endpoints & infrastructure products? Is there a way to force TMS to use v3 and disable v1 & v2? Thank you, Justin Ferello Technical Support Specialist KBZ, a Cisco Authorized Distributor http:/...
I'm using TMS with VCS to provision Jabber Video clients. When they register to the VCS, they register as username@domain.com. Is there a way to also register an office phone number? For example, 123@domain.com. I'd like for the Jabber Video user...
Hello,we received a new SX20 with TC6.0.0 installed.Is it possible to downgrade to TC5.1.7 without having a Releasekey for TC5?The reason is, that we're still running TMS 13.2.1 (with a planned Upgrade to 14 in the near future) on a Windows Server 20...
While in a call, Example 1 below, the registration timed out and was removed by the VCS. Once that happened, the SIP to SIP call ended abruptly at 16 minutes.2013-07-08T19:14:34-07:00 tvcs: Event="Call Disconnected" Service="SIP" Src-ip="xxx.yyy.149...
Hi all,I wonder if anyone here has a solution to the following problem.Customer reports that he has performed a fectory reset on his EX90. After the reset he is unable to access it using the webgui (http & https) or SSH.The feeling one gets is that t...
Hi,After installing Cisco TelePresence Conductor and associating my MCU's to bridge pools etc, i've noticed that i am not able to select any MCU's when i schedule a call via the TMS booking portal.Under the MCU tab i don't see any of my MCU's that wh...
Hello all!Has the camera recovery command been removed from TC6 software? I've been trying to talk someone through a camera recovery and the codec is not recognizing the "systemtools camerarescue" command. The codec is running TC6.1.2.Thanks!
I have found documentation about how to register my C20 into CUCM 8.6 but nothing about CUCM 8.5.http://www.cisco.com/en/US/docs/telepresence/endpoint/codec-c-series/tc5/administration_guide/administering_endpoints_running_tc5_on_cucm8-6.pdfI am wond...
We have several Codian Gateways that are running the new 2.2 software.This software now includes direct SIP protocol capability.My question is HOW do I configure the GW...I'm very familar with how it works with H.323.... (Prefix refgistration)There a...
Does cisco has a solution for this caveat? It works for OCS relay but not for B2BUA.Call forward from Lync to a VCS FindMe or endpoint results in a ‘loop detected’ callIf a call from Cisco VCS is made to a Lync client which has a forward to another ...
Hello!Is there a document that lists the IR values for the buttons on the TRC5? The TRC3 and the TRC4 mappings are in the MXP Admin guides.Thanks!
Hi,I am getting a critical error for TANDBERG VCSC saying that memmory utlization is 93% , Error condition is Critical form the OPM console . Does anyone know how to fix this problem? Let me know if you need any logs. VCS version is X7.2.1. Ple...
We have several CTS series systems and now got the first C40 device.I can get C40 registered to CUCM but not able connect any CTS system.CTS systems works fine on point to point and multipoint calls.CUCM is version 9.1.1CTS systems are 1.9.4C40 is TC...
Is CEC enabled by default or not?How do we enable CEC on SX20? My SX20 codec is not powering up the display screen on going from standby.SX20: TC5.1.7
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-26-2024 08:22 AM | ||
04-25-2024 05:00 PM | ||
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM |