Dear CommunityDoes someone knows on when sip condition expressways jump to next search rule after routing to a zone?Assume that "on successful is configure to "Continue".For example assume you send a sip invite to a neighbor zone and zone replying w...
Forum Posts
Hello community,one of our customers wants to control the AV system and in room functions from the Cisco Touch 10.In fact, there are two Touch 10, one in each room.We use Extron control, a driver for the Touch 10 is available, so far so good.Based on...
I have cisco meeting server 3.9 and cisco meeting management 3.9, I configured meetingapps for file-sharing but this feature for role that I configured in cisco meeting management not visible, with space default Role this feature is visible.
My Expressway logs show this event once per second:traffic_server[16496]: Event="Sending HTTP error response" Status="400" Reason="Bad Request" Dst-ip="127.0.0.1" Dst-port="30054" UTCTime="2020-10-15 15:59:52,083" I don't have any issues with how thi...
We are having issues getting Miracast to work properly on Cisco Kit EQ units in our organization. The function works fine on Room Bar Pro units, but when attempting to start sharing on EQ, we get a message "Something went wrong" and the device does ...
I have 3 cameras SRG-X400, I connect to HDMI switch I need to use the Sony camera with the Codec as the second camera or main camera what is the possibility in this case, the cisco bar will work with sony or not, because once I use the camera as the ...
DeskPro was used primarily as a monitor (without any network connectivity) and it stopped working (nothing on the screen).I gather that it is not even booting up, since the white LED keeps blinking (every 2-3 seconds).Oddly enough, it doesn't seem li...
Hello Cisco community, We have a SX20 installed about a year ago. The problem is that the password may have been changed and nobody knows what it is.. I have attempted the default of username "admin" with no password and all other combinations that ...
Hello Cisco Community! My client has recently installed a Webex Room Kit Plus in their environment. The device is fully operational inside Webex Control Hub. On the Cisco Room Navigator, under Camera Settings, we went to Manual camera view and config...
Please see note below:
I’ve been fighting an issue at my workplace for a long time now and hope someone on here might have some knowledge or thoughts on this, or better yet experienced and resolved the same issue.We are experiencing an issue with 4 out of our 30+ room kits...
Hi, I am trying to find out if i have enough licenses in CUCM to register new cisco room kits . From CUCM-Licensing - i see only how many Telepresense Room current usage, but cant see how many total i can have . Is there way to find this out by myse...
If anyone has a current word version of CISCO Certificate of Destruction (COD) Form 99 could you provide it please. Would appreciate it very much. Thank you.
Hello,i have a problem with camera of other users. In the meeting i have a black stains on image of my friend. How can i fix that? reinstal doesn't works. Please help me as fast as you can.
When i tries to share a video during conference then i am not able to share video with audio in cisco room kit pro codec
