TelePresence and Video Infrastructure

When CUCM sends a sip message to the VCS (across a trunk) it includes :5060 at the end of the SIP URI.  Can the :5060 be removed with some setting on the CUCM side ?  I can do it on the VCS with a transform.  I'm wondering if there is any way to chan...

Hi outhere,we installed tmsxn 11.3.1 it works fine for adding conference.I only do have problems by deleting a conference in Lotus.On tms-side I never see any packets.Logs on Lotus doesn't show the process because for deleting the TMSEventCatcher.dll...

Hi All,I need help, i have vcs expressway installed but when my end point is registered on VCS EXPRESSWAY i can not call to internet or PUBLIC IP.Kindly help.

                   Hello,I understand it is possible to create a SIP TLS/IpSec trunk between CUCM and VCS without using a certificate from external CA.For this the CUCM must be in mixed mode. But how to import the VCS certificate into the CUCM or do ...

We have three Cisco C40's on site set up identically and I am having an issue with only one of them. The issues is in the Call Control portion of the web interface. I can control the primary camera just fine, but if I switch to the secondary camera, ...

I have a customer that is currently migrating an old environment of codecs just thrown out on the network and then had NATed a public IP to the device's private IP for connectivity to the internet.  this is not an uncommon deployment, but we are now ...

Hi All,TMS v 14.2, TMSPE v1, VCS 7.1]I have some schemas and templates installed on TMS for the provisioning of information to Jabber Video and old Movi clients (going back to version 3). I have been able to set up the provisioning template on one ve...

hi everyone,I am new on telepresence, my client only purchase the MCU and two P42C40 and don't purchase the VCSc and VCSe, so the P42C40 are registered on CUCM version 8.6.2 as phone. So I create SIP Trunk on CUCM and route pattern for communication ...

Can anyone confirm that the Lync-VCS integration using Trusted Application and a Static route does not support Polycom VSX/HDX devices?Calls from Polycom (registered to the VCS) to Lync work, but calls from Lync to Polycom have one-way media (Lync to...

Hi,One of our client has installed C40 device,three month back and it was working fine.today they just did the factory reset unknowingly, after that we are not able to reister the IP Addrees in the device, while entering the remote Ip Settings are sh...