TelePresence and Video Infrastructure

Hi all,Is it possible to connect an SX20 to a directory server that is NOT TMS?Datasheet says:Unlimited entries using server directory supporting LDAP and H.350 (requires Cisco TelePresence Management Suite)But admin guide says:Unlimited entries usin...

Hi, I am following this document to create a CSR for the certificateshttp://www.cisco.com/en/US/docs/telepresence/infrastructure/vcs/config_guide/Cisco_VCS_Certificate_Creation_and_Use_Deployment_Guide.pdfThe openssl commands to create the certificat...

I just found out that we are no longer able to pull up CDRs from our Tandberg Classic endpoints (all running E5.3).  Is this something I can fix in admin settings of TMS?           

Hi all.I have a CTS 3200 with a HFR codec and extra side LCD displays.When not in a call and sharing presentation the laptop image is displayed on the side screen. Floor screen and on the center main display.However when in a call and sharing present...

I have been reviewing the documentation located at http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g/7_0/english/administration/guide/7925cfgu.html#wp1336223When I try and change the phone configuration for a 7925G handset - namely the 'web ...

Hi Quest about AD user integration vs Non AD user integration and if its possible? We  currently have a  VCSc v7.2, VCSe v7.2 and TMS 13.2.2 running TMSPE. We  would like it for our internal users to be integrated with AD so they  are able to use ...

Hi there,I have an Cisco SPA501g IP phone which is connected to my home router.When the phone rings it only does for 60 seconds then goes to voicemail. I need to extend the ringing tomeout, but I can't see an option anywhere.Any help would be great.T...

we have a vcsc and vcse in our environment, and have deployed some jabber video for users which register to our vcse. when we call from a c90 endpoint (registered to vcsc) to jabber video on ipad (registered to vcse), some users did not get the video...

Testing out pointing to a higher level OU in TMS for Movi Users and I am getting an error I can't run down. I am able to import the Users into TMS (53000 Users), but once the synch starts with VCS it errors out with the following error:"TMS Provision...

Hello,Just installed a MCU 4215. When i call from my endpoints (SX20), the video quality is very poor. Checking the info of the call (attached img) the only thing that comes to my attention is the low fps rate...The endpoint and MCU are connected to ...

HI,Customer has MX300 registered to CUCM 8.6.2a. They use TP Server for multi-point calls. They are reporting that the setting available on the Touch panel, "Layout for remote participants" does not actually change the view. After digging into this a...