Problem: On the phone (connected) and receive another incoming call to your directory number the only softkey option is Answer or there is a more key with a Do Not Disturb. Would like to have a call state of Connected and Ringing In so that we...
Hi All,I have the following setup in my labCUCM->mgcp gw(PRI)->PSTN rtr(acting as provider) -> H323 GWPRI -> CUCM.I want the called ID to display with a + before the number. I see the + in the debugs however in the phone just the number comes in the ...
Here’s the situation:•1) Singapore SX20 call to UK SX20 (vice versa) – Good quality on both units•2) China SX20 call to UK SX20 (vice versa) – Good quality on both units•3) Singapore SX20 call to China SX20 (vice versa) – Good quality on SG unit but ...
I cannot get the Operator conference in TMS to work. Each time I try, I get the window to select the endpoint to put into the conference, but I get a message that Start time cannot be after end time. Any suggestions? TMS is 13.1.1. ...
Hello,MCU : Codian MSE 8510 Blade (configured in HD mode)Software version : 4.2(1.46)Build: 6.17(1.46)The bridge has been rebooted unexpectedly this morning and we are actually investigating this problem. I would appreciate if you can help me and pro...
Issue1:We recently upgraded to TMS-PE with TMS 13.2.1We are trying to monitor the users provisioned from Systems > Provisioning > Devices.We do see the users provisioned and the corresponding times. But most of the entries are seen with empty Video A...
Hello.I've seen that there is a new video collaboration way with cloud services through Cisco Webex Telepresence service, but I don't see if it interacts with Webex Meetings.Can I join to a Webex Telepresence session from a Webex Meeting session?Rega...
HiWe have a client that wants to relocate a Profile 55 single screen unit that is currently on wheels/casters. The client he would like to wall mount it in the new venue. I know you can order a wall/floor standing or one on wheels with the profile ...
Hi,I have a scenario where a single instance of TMS is managing a number of endpoints, MCU's and ISDN Gateway's across two different geographical locations.The WAN link between the locations is not good enough to support all IP calls yet, so i am usi...
Hi There,I was wondering if anyone knows a way to turn off dual streaming (H.239) on an SX20? We want to be able to use the "Laptop" button on the remote or the "Present" button on the Touch 8 to just change to the PC input but not initiate dual stre...
Case 1: VCS-C<==[Firewall]==>VCS-C<====>InternetCase 2: VCS-C<==[Firewall]==>VCS-E<====>InternetIn both cases , there are option keys: Encryption, Interwork, Traversal, Non-Traversal.I have 3 questions and I hope someone please to answer them:Q1. Whi...
Hello. I wanted to add the CUCM (9.1) to our TMS (13.2.2) according to the steps in the TMS docu for CTS and CM integration. CUCM shows up after the "Add system" task together with the registered CTS-1300 (below the CUCM entry).. The CUCM appears in ...
TMS allows for Automatic MCU failover:- if conference start fails- if conference start fails or MCU Polling failsNot much documentation is found on this.For the part 'MCU Polling fails'. Does this works for SIP?What is the requirement for this failov...
