I know you can have audiable alerts for open active conferences in CCC within TMS, but can you have email alerts for any conference wheither it is open or not? Alerts such as packet loss, disconnect, connect, connection error, etc.Thanks, Patrick
I know you can have audiable alerts for open active conferences in CCC within TMS, but can you have email alerts for any conference wheither it is open or not? Alerts such as packet loss, disconnect, connect, connection error, etc.Thanks, Patrick
Hi,Does anyone know of any software availiable to monitor MCU usage & warn the administrator should ports become full? At the minute we have to manually logon to the system and check who is using what and manually tally the port usage up, not to ment...
I've found that when using the Jabber for iPad app, I can connect to an endpoint, point-to-point (C-Series, Movi), and I'm able to recieve the content channel just fine. Though when I'm connected through our MSE8510 MCU, I don't get the content chan...
Hi,I know it is possible to import .txt files in the format into TMS. 101, Description for billing code 1.102, Description for billing code 2.103, Description for billing code 3Unfortunately, each time I try to upload the .txt file it fails. As an al...
Greetings Any ideas please Core Infrastructure – All equipment installed on a single VLAN, the units are physical devices running VM as per below I have added endpoints to CUCM publisher and went through the configurations as per user guide, also che...
i have C 90 . i plug ON the but system not show the MENU and Camera Show self view when i move the Camera . Yasir Vistro
We have some inquries on the Appendix 9 – Cluster name and DNS SRV records of the document- Cisco_VCS_Cluster_Creation_and_Maintenance_Deployment_Guide_X7-1.In our current network, we have installed TMS on the Window server 2003 R2, however, we faced...
Hello,I created a permanent conference at MCU and added to preconfigured participant which is couple defined endoints.I setup Invite pre-configured participants field as "When at least one other participant is present".When I call this conference num...
Hi, I've tried to join to CTMS 1.8 static meeting from Profile 42 C40 (with ext 30003), but it doesn't get any video. From CTMS log, there is ALARM_CALL_FAILURE : Call dropped. Meeting: 9064797157. Call number 30003 ended with message: NO_RESUM...
What iz the min bw req for Ex60 and C20. Is there any customer readiness doc available. How should be the room lighting. What is the preferred media like fiber or wimax for VC.
Hi friends I need your help configure Cisco 3745 router which is installed with 2x FXO and 4x FXS ports and have latest 12.4 voice IOS. Both two FXO ports will be connected to BT (UK Telco) as external lines and all four FXS ports will be connected t...
WIth the latest software upgrade to TC 5.1.3 I have a locations where their network is retricted to one MAC address per port. Since the software upgrade the EX60/90 is broadcasting two MAC addresses per port; one for the codec and one for the touch p...
Hi,I'm looking for an option to import contacts saved in excel spreadsheet in to the TMS manual phonebook? How to do that? I'm running out of ideas.Thanks...
I have official Cisco telepresence doc that is explaining how basic call between two CTS endpoints is established: first SIP is exachanged between endpoints and the CUCM, then RIP (?!?) is exchanged directly between two endpoints and finally RTP that...
Looking for any CAD drawings of the Dual Profile 65", haven't found any on the Cisco site.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
03-26-2024 08:37 AM | ||
03-22-2024 10:12 AM | ||
03-20-2024 01:51 AM | ||
03-11-2024 05:37 PM | ||
03-06-2024 10:37 AM |