TelePresence and Video Infrastructure

Looking for clarification on whether OneTable is available for the CTS3x00 endpoints. The TelePresence Server data sheet indicates that is only available on the T3.http://www.cisco.com/en/US/prod/collateral/ps7060/ps11305/ps11317/ps11339/data_sheet_c...

Are there any document that describe the communication between TMS and CUCM / CTS.Or maybe someone know which protocols that are used? //Robert

Hallo all,i have VCS infrastructure with VCSc, MCU, TMS and about 30 Cisco E20 phones. Phonebook is integrated with Microsoft AD. I see contacts in the phonebook in TMS, connection to the AD is fine, E20 configured fine(i think:)). But, the E20 phone...

Hi all,I'm facing a problem with MPS 200 that need your help. In particular, I created new conference, but when adding participant, the message "MediaC. 0 FAILURE" is appear on LCD and the FAIL alarm blinks continuosly. As a result, conference isn't ...

Hi All, We have a VCS Control and VCS Expressway and endpoints. VCS control and endpoints are in the same subnet. We have recently purchased a dedicated internet link for video traffic alone. I have configured the policy based routing in the LAN so t...

Hello, What do you think about using a neighbor zone on VCS for MCU in SIP against classic registration. It's the only way i found to palliate SiP generic préfix registration leack.Tank youRegardsSent from Cisco Technical Support iPad App

Hi All,Using the cisco router (2900 series) as an SIP to E&M gateway. On one side we have a SIP device and on the other side of the gateway we have an E&M device.When the E&M device terminates a call the gateway should issue a SIP BYE message to the ...

hi,when i connect analog line direct to analog phone the voice volume is fine but when i connect to 2911 router (fxo port) the volume is low. i have cucmbe8.6 as call agent and 2911 as voice gateway.. following is the config for voice portsvoice-port...

  Hi,After a long search, I don't find information on the process of update release key for the endpoints in the TMS.In TMS, some endpoints don't have license key for the update although they are under maintenance while others pick them up correctly....

Hi,I have a question about the dial format to call from a Cisco/Tandberg C20 to a Polycom H323 device.I tryied to call using the following formats:Public_IP##extentionextention##Public_IPPublic_IP!extentionPublic_IP@extentionThe didn't work at any ti...