cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
313
Views
5
Helpful
1
Replies

Cisco C60 or Cisco C90 three-party conference

Nick Bochkaryov
Level 1
Level 1

Dear Experts,

Do codecs Cisco C60 or Cisco C90 which have MultiSite optional key allow us to display image on separate screens during multi-point conference, e.g. to display each participant on a separate screen connected to codec during three-party conference?

Your quick response is highly appreciated.

 

Regards,

Nick

1 Accepted Solution

Accepted Solutions

Wayne DeNardi
VIP Alumni
VIP Alumni

Yes, you can do this with the Compositor API, or the TC Console software to create custom layouts.

You can display multiple cameras on the same screen, or different sources on multiple screens, or combinations of the above depending on whether a presentation is being shown, etc.

The devices are quite flexible.  (Note: this doesn't work on a C40 - it needs to be a C60 or C90).

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to mark helpful responses and to set your question as answered if appropriate.

View solution in original post

1 Reply 1

Wayne DeNardi
VIP Alumni
VIP Alumni

Yes, you can do this with the Compositor API, or the TC Console software to create custom layouts.

You can display multiple cameras on the same screen, or different sources on multiple screens, or combinations of the above depending on whether a presentation is being shown, etc.

The devices are quite flexible.  (Note: this doesn't work on a C40 - it needs to be a C60 or C90).

Wayne
--
Please remember to rate responses and to mark your question as answered if appropriate.

Wayne
--
Please remember to mark helpful responses and to set your question as answered if appropriate.
Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: