Hi, I currently setting up cisco room kit plus with quad camera and 2 P60 camera. Now the set up is quad camera hdmi is direct connected to codec hdmi 1, the 2 P60 camera hdmi is connected to hdmi switcher then out to codec hdmi 2. I need the codec hdmi 3 to do a send content to far end. But the problem is I can’t control all the 3 camera. Although I already connected all 3 camera lan and codec camera control port lan to the switch. Can someone advise how to solve it? I had done all configuration in the web browser. The attached file is the picture I took from touch 10.
