cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
1049
Views
0
Helpful
2
Replies

CMS - CUCM conference - video not working

majeed002
Beginner
Beginner

I am doing a POC for one of my client.  I have currently deployed CMS core and integrated it with the existing CUCM cluster.  All configuration in CUCM and CMS are as per Cisco configuration guides.  Integration between CUCM and CMS is only through SIP Trunk (for rendezvous calls) and CMS is not registered as conference bridge in CUCM.  When calls are tried, audio is working but no video seen.  CUCM version is 11.5 and CMS 2.2.  Any known issue or am I missing any configuration. Thanks in advance.

2 Replies 2

Jaime Valencia
Hall of Fame Cisco Employee Hall of Fame Cisco Employee
Hall of Fame Cisco Employee

Do you have enough BW to place video calls in your config?

HTH

java

if this helps, please rate

ali.yusuf
Beginner
Beginner

Hi, in CUCM have you configured the locations and regions - you can try by increasing Video bandwidth etc. 

 

Hope that helps 

Yus 

 

Please rate if this helps. 

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers