Content Server

[Yasir Vistro]

Hi All

I have content server new installation.  When I make a call C 90 to Content Server Main Video record but when I run the presentation only presentation can record I like to record both video (Main and Dual video). 

Regards

Yasir Vistro        

[Jens Didriksen]

You need to edit and assign the correct recording template which is to be used.

Strongly recommend you look at the docs; i.e.

http://www.cisco.com/en/US/docs/telepresence/tcs/5_1/administration/guide/creator.html#wp1000511

/jens

[Yasir Vistro]

thanks  Jens

I have another query I have C 90 connect with Dual Video when I make a single call and other call to Content Server, on 2^nd screen I view the Recorded “I don’t want to see this. Is it any option to see Red Icon?

Yasir Vistro

[Jens Didriksen]

No, but you can change the local and remote layout which might help, see "The Video Settings" under the advanced settings in the admin guide:

http://www.cisco.com/en/US/docs/telepresence/endpoint/codec-c-series/tc5/administration_guide/profile_c90_and_codec_c90_administrator_guide_tc50.pdf

You can also design your own layouts using the TC Console:

http://www.cisco.com/en/US/docs/telepresence/endpoint/codec-c-series/tc4/tc_console/user_guide/codec-c-series_tc-console_tc40.pdf

Otherwise you'll have to connect using an MCU which allows you to mute the TCS video.

/jens

[Yasir Vistro]

I have received Cisco Content server with replacement of Tandberg Content server ... in Tandberg  content server Support Call speed was 2Mb ...  I like to increase 2Mb to 4 Mb. with premium resolution option is this problem resolve? 

Yasir Vistro

[Jens Didriksen · Accepted solution]

Yes, with Premium Resolution option key installed, maximum call speed is increased to 4Mb.

/jens

[Yasir Vistro]

i made a call and  email a link  when laptop use click on that link it,s required a admin  password. 

Yasir Vistro

[Jens Didriksen]

That is correct behaviour, see user administration section in the admin guide:

http://www.cisco.com/en/US/docs/telepresence/tcs/5_1/administration/guide/admin.html#wp1155243

You can restrict user access to certain recordings by associating a recording alias, or a specific recording to a specific user, users or groups of users. An admin has access to all recordings.

/jens