CTS 1100 with CTS Man.

[bobby.jacob]

I have an installation for a CTS 1100 and CTS 1300 soon, also i need to install CTS manager.

1)Can i know CTS Man 1.6 is compatable with MS Exhange 2010?

Is it mandatory to run Pre-Qual tool on the system.Or can we manually do the config on CTS Man during Post Install?

2)How long it may take for CTS Man. Installation and integration for MS Exchange.?

Tnx

Bobby

[Rafal Szeremeta]

Hi Bobby

For Exchange 2010 you need to have CTS MAN version 1.7 or higher. I would advice go for latest version 1.9 if possible

Installation shouldn't take longer than few hours, all depends on you environment, how many rooms you have, ect.

I strongly recommend to run Cisco PreQualification Assistant before running actual install.

Please check this documentation:

http://www.cisco.com/en/US/docs/telepresence/cts_manager/1_7/release/ctm_rn1_7.html

http://www.cisco.com/en/US/docs/telepresence/cts_manager/1_6/admin/ctm1_6adminguide.html

http://www.cisco.com/en/US/products/ps7074/tsd_products_support_series_home.html

Thanks

Rafal