09-21-2012 02:26 AM - edited 03-17-2019 11:50 PM
Hi,
have a problem with dialing from CUCM to VCS (7.1). The othr way is working fine.
I have played with Search rules and Transforms but it will not work. The End device on VCS is a SIP device.
Here are the log:
Sep 21 11:14:26 tvcs: Event="Call Rejected" Service="SIP" Src-ip="10.234.40.5" Src-port="5060" Src-alias-type="SIP" Src-alias="sip:60976@10.234.40.5" Dst-alias-type="SIP" Dst-alias="sip:50555@10.224.35.249:5060" Call-serial-number="bdb3272c-03cc-11e2-bef9-0010f3249b3a" Tag="bdb32808-03cc-11e2-bbef-0010f3249b3a" Detail="Not found" Protocol="TCP" Response-code="404" Level="1" UTCTime="2012-09-21 09:14:26,549"
Sep 21 11:14:26 tvcs: Event="Search Completed" Service="SIP" Src-alias-type="SIP" Src-alias="60976@10.234.40.5" Dst-alias-type="SIP" Dst-alias="sip:50555@10.224.35.249:5060" Call-serial-number="bdb3272c-03cc-11e2-bef9-0010f3249b3a" Tag="bdb32808-03cc-11e2-bbef-0010f3249b3a" Detail="found:FALSE, searchtype:INVITE" Level="1" UTCTime="2012-09-21 09:14:26,549"
Sep 21 11:14:26 tvcs: Event="Call Attempted" Service="SIP" Src-ip="10.234.40.5" Src-port="5060" Src-alias-type="SIP" Src-alias="sip:60976@10.234.40.5" Dst-alias-type="SIP" Dst-alias="sip:50555@10.224.35.249:5060" Call-serial-number="bdb3272c-03cc-11e2-bef9-0010f3249b3a" Tag="bdb32808-03cc-11e2-bbef-0010f3249b3a" Protocol="TCP" Auth="NO" Level="1" UTCTime="2012-09-21 09:14:26,539"
Sep 21 11:14:26 tvcs: Event="Search Attempted" Service="SIP" Src-alias-type="SIP" Src-alias="60976@10.234.40.5" Dst-alias-type="SIP" Dst-alias="sip:50555@10.224.35.249:5060" Call-serial-number="bdb3272c-03cc-11e2-bef9-0010f3249b3a" Tag="bdb32808-03cc-11e2-bbef-0010f3249b3a" Detail="searchtype:INVITE" Level="1" UTCTime="2012-09-21 09:14:26,539"
Could anybody help?
Regards
Jason
Solved! Go to Solution.
09-21-2012 04:05 AM
jason,
the desitnation is coming as "50555@10.224.35.249:5060"so that ip should be 10.224.35.249
what you have to change here is change the search rule to.
source any
Regex (.*)@10.224.35.249((:|;).*)?
action replace
string \1@10.224.35.249
the SIP AOR is 50555@10.224.35.90 so i think it should work after making the chnges to search rule.
rgds,
Alok
09-21-2012 02:38 AM
HI Jason. The call inbound from CUCM is looking for: 50555@10.224.35.249:5060? Is the system registered locally to VCS? If the system is registered at: 50555@domain.com on VCS control, you have transform to convert this call to that domain?
May we see the search history of the entire call?
VR
Patrick
09-21-2012 02:58 AM
Hi Jason,
404 not found means VCS is not a ble to find the endpoint sip uri.
have you ensured that you have created a transform or search rule to strip the ip and add domain.
you need to create a search rule for incoming where you would stripping the ip and chaning it to VCS sip domain
source any
Regex (.*)@10.224.35.249((:|;).*)?
action replace
string \1@vcs sip domain\2
ensure the search rule has necessary priority set.
Thanx
Alok
09-21-2012 03:39 AM
Hmm i have tried it but i only get calls working from the registered EX90 to the CUCM but not the other way.
CUCM: 10.234.40.5
VCS: 10.224.35.249
So the search rule should look like this from you?
source any
Regex (.*)@10.234.40.5((:|;).*)?
action replace
string \1@10.224.35.249\2
Or have to be the domain instead IP? but i tried both...
I have tried you search rule but the same in the log... Is the EX90 wrong registered maybe?
Protocol SIP
Node Local VCSC Zone
Serial number d2c77e66-03d5-11e2-93e1-0010f3249b3a
Authenticated False
Creation time 2012-09-21 12:19:27
Duration 16 minutes 52 seconds
Seconds since last refresh 0
Seconds to expiry 60
Vendor information TANDBERG/516 (TC5.1.3.292001)
AOR 50555@10.224.35.249
Contact sip:50555@10.224.35.19:57093;transport=tls
Instance "
Public GRUU sip:50555@10.224.35.249;gr=urn:uuid:00000000-0000-0000-0000-005060075d59
09-21-2012 04:05 AM
jason,
the desitnation is coming as "50555@10.224.35.249:5060"so that ip should be 10.224.35.249
what you have to change here is change the search rule to.
source any
Regex (.*)@10.224.35.249((:|;).*)?
action replace
string \1@10.224.35.249
the SIP AOR is 50555@10.224.35.90 so i think it should work after making the chnges to search rule.
rgds,
Alok
09-21-2012 04:07 AM
Sorry the 10.224.35.90 was wrong.... i changed it...
I will check your search rule.
09-21-2012 04:07 AM
Or add the domain to the SIP URI on the SIP Settings page on your EX90 and convert to domain. Either way should work, but it seems the EX90 doesn't have @domain in SIP URI page, and its registering @ip since it isn't listed.
VR
Patrick
09-21-2012 04:15 AM
Ok, changed the rule to yours and got a busy tone on the phone and a call loop in the log:
Sep 21 13:09:10 tvcs: Event="Call Rejected" Service="SIP" Src-ip="10.234.40.5" Src-port="5060" Src-alias-type="SIP" Src-alias="sip:60976@10.234.40.5" Dst-alias-type="SIP" Dst-alias="sip:50555@10.224.35.249:5060" Call-serial-number="c510cb2c-03dc-11e2-93ff-0010f3249b3a" Tag="c510cc08-03dc-11e2-8277-0010f3249b3a" Detail="Loop Detected" Protocol="TCP" Response-code="482" Level="1" UTCTime="2012-09-21 11:09:10,901"
changed the rule to
source any
Regex (.*)@10.234.40.5((:|;).*)?
action replace
string \1@10.224.35.249
Target is localZone
and the log shows 404
Sep 21 13:10:24 tvcs: Event="Call Rejected" Service="SIP" Src-ip="10.234.40.5" Src-port="5060" Src-alias-type="SIP" Src-alias="sip:60976@10.234.40.5" Dst-alias-type="SIP" Dst-alias="sip:50555@10.224.35.249:5060" Call-serial-number="f0c927dc-03dc-11e2-a043-0010f3249b3a" Tag="f0c928c2-03dc-11e2-ba27-0010f3249b3a" Detail="Not found" Protocol="TCP" Response-code="404" Level="1" UTCTime="2012-09-21 11:10:24,205"
Any suggestion?
09-21-2012 04:24 AM
Forgot to remove the \2 . Now its working. In and Out. Thank you very much.
Now the next step ist to register a device or Jabber for Video from Outside.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide