Hi MuazamI think you

muazam ali · ‎02-24-2015

Hi All,

there is a problem i am trying to register DX80 with CUCM 10.0, i have uploaded the COP file for DX80 but still i am unable to see DX80 in the device list.how can i register cisco DX80 with cucm.

George Thomas · ‎02-24-2015

Did you reboot the cluster after the install?

Please rate useful posts.

muazam ali · ‎02-24-2015

Hi George,

I dont have any cluster i have stand alone CUCM, i have restarted TFTP service and Call manager it self but it does not show any device named DX80

George Thomas · ‎02-25-2015

Please reboot the server after the installation since that is a mandatory step.

Please rate useful posts.

Jaime Valencia · ‎02-24-2015

You already asked this in other thread

https://supportforums.cisco.com/discussion/12260371/how-add-dx80-and-dx-650-cucm-10x

HTH

java

if this helps, please rate

muazam ali · ‎02-24-2015

Hi jamie,

Yes i have asked this question on another thread as well

Usama Alajrami · ‎04-09-2015

Hi Muazam

you can check this page:

https://supportforums.cisco.com/discussion/12374256/adding-dx80-cucm-91

download the device pack of CUCM 9.1.2 it will be included in.

cmterm-devicepack9.1.2.12039-1.cop

DX80 unable to register with CUCM