cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
442
Views
0
Helpful
4
Replies

Switch firmware on CTS-1300

Syed
Participant
Participant

Dear All,

May I ask you how to switch firmware version on CTS-1300 through cli?

Thank you

Regards,

Syed

2 Accepted Solutions

Accepted Solutions

Try utils system switch-version

Refer following URL for more information,  http://www.cisco.com/c/en/us/td/docs/telepresence/tx_sw/6_0/command_ref/tx_sw_cli_book/tx_sw_cli_cmd_utils.html#26829

View solution in original post

Hi syed,

you can login to the CLI of the CTS and give command ütils system switch-version.

You can also be specific and do slot switching by giving command utils system switch-version force 2

. If you do not configure an optional value, the system will toggle between slots 1 and 2. If the system is currently in a call, the version change will not be allowed. To override, use the force option to switch immediately.

It is not recommended to switch the version during the live call.

View solution in original post

4 Replies 4

Syed
Participant
Participant

I want to switch from slot1 to slot2

Please see below show version output

admin:show version
primary
Factory CTS 1.9.2(19) P1
*Slot 1 CTS 1.9.2(19) P1
Slot 2 CTS 1.10.7(5) P1
loads file information
Factory (cmterm-CTS.1-9-2-19R-K9.P1)
CTS: CTS.1-9-2-19R-K9.P1.sbn
Touch: CTSDEV.1-9-2-19R-K9.P1.SPA
Slot 1 (cmterm-CTS.1-9-2-19R-K9.P1)
CTS: CTS.1-9-2-19R-K9.P1.sbn
Touch: CTSDEV.1-9-2-19R-K9.P1.SPA
Slot 2
No loads file

Try utils system switch-version

Refer following URL for more information,  http://www.cisco.com/c/en/us/td/docs/telepresence/tx_sw/6_0/command_ref/tx_sw_cli_book/tx_sw_cli_cmd_utils.html#26829

Thank you Navid & Prasad.

Learnt a new thing.

Hi syed,

you can login to the CLI of the CTS and give command ütils system switch-version.

You can also be specific and do slot switching by giving command utils system switch-version force 2

. If you do not configure an optional value, the system will toggle between slots 1 and 2. If the system is currently in a call, the version change will not be allowed. To override, use the force option to switch immediately.

It is not recommended to switch the version during the live call.

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Recognize Your Peers