11-14-2012 10:02 AM - edited 03-18-2019 12:07 AM
We have a remote office. Recently, when calling this office with the SX20, its connecting with audio only. This had previously worked before but we dont know whats changed. Calling the same remote office from a C40 in the same office as the SX20 works fine.
We have called some test numbers with the SX20 and that works fine too.
below are log extracts showing the call set up for a bad call and a good call. , iv'e replaced sensitive data with xxxx's
Does anyone have an idea of whats causing this from tyeh logs or what can generally be the issue?
thx,
happyhammer
==================================================================
Audio only SX20 to remote office
====================================================================
=================================================================
audio and video to same remote office using a C40
=================================================================
Nov 14 14:27:30 (none) main: 3392266.06 MC I: CallParticipantImpl: calledUri: h323:xxx.xxx.xxx.xxx
Nov 14 14:27:30 (none) main: 3392266.06 H323Call I: h323_call::makeOutgoingCall(p=129): Sending call request to stack (rate=1920000 srcName='', src uri='h323:xxx.xxx.xxx.xxx' src e164='xxxxxxxxxxxxxx' dest='xxx.xxx.xxx.xxx')
Nov 14 14:27:30 (none) main: 3392266.06 MC I: RemoteParticipant::proposeMode(p=129, ch=1): Did not find mixer ((nil)) or channel (0x499cad9c)
Nov 14 14:27:30 (none) main: 3392266.07 MC I: RemoteParticipant::propose60fpsThreshold(p=129, ch=1): Did not find mixer ((nil)) or channel (0x499cad9c)
Nov 14 14:27:30 (none) main: 3392266.07 MC I: RemoteParticipant::reevalRefMode(p=129,ch=1) set ref [Audio (1): G.711a 64k ] q= auto, t60=6000
Nov 14 14:27:30 (none) main: 3392266.07 MC I: RemoteParticipant::reevalRefMode(p=129,ch=2) set ref [Video (2): vid-off 0x0@0.0 0k ] q= auto, t60=6000
Nov 14 14:27:30 (none) main: 3392266.07 MC I: RemoteParticipant::reevalRefMode(p=129,ch=3) set ref [Video (3): vid-off 0x0@0.0 0k ] q= auto, t60=6000
Nov 14 14:27:30 (none) main: 3392266.07 MC I: RemoteParticipant::proposeMode(p=129, ch=4): Did not find mixer ((nil)) or channel (0x4994357c)
Nov 14 14:27:30 (none) main: 3392266.07 MC I: RemoteParticipant::propose60fpsThreshold(p=129, ch=4): Did not find mixer ((nil)) or channel (0x4994357c)
Nov 14 14:27:30 (none) main: 3392266.07 MC I: RemoteParticipant::reevalRefMode(p=129,ch=4) set ref [Data (4): H.224-HDLC 64k ] q= auto, t60=6000
Nov 14 14:27:30 (none) main: 3392266.07 MC I: MediaServerAction(): InputGate(ig=49) creation took 228 miliseconds
Nov 14 14:27:30 (none) main: 3392266.28 H323Call I: h323_call_handler::handleH323AlertInd(p=129, s=1): Incoming call alert indication
Nov 14 14:27:30 (none) main: 3392266.45 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=400/60/0/4575
Nov 14 14:27:31 (none) main: 3392266.80 MediaStreamController I: SC::PlayReq(og=12) path='/sounds/', tone=2
Nov 14 14:27:31 (none) main: 3392266.89 MC I: RemoteInputGateImpl::setIncomingModeReport(ig=43,p=129) [Audio (1): aud-off stereo 0k ]
Nov 14 14:27:31 (none) main: 3392266.98 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=400/60/0/4578
Nov 14 14:27:31 (none) main: 3392267.50 CAMERA I: CamVisca::sendCAMPositionInd cameraId=1 pos=400/60/0/4575
Nov 14 14:27:34 (none) main: 3392270.47 H323Call I: h323_call_handler::handleH323CapsetInd(p=129, s=1) Received new capset
Nov 14 14:27:34 (none) main: 3392270.47 MC I: RemoteParticipant::setRRRate(p=129): Received new remote rate from protocol: 0 (old: -1)
Nov 14 14:27:34 (none) main: 3392270.47 MC I: RemoteParticipant::modeChanged(p=129, ch=1): ModesController wants to run mode: Audio (1): aud-off 0k
Nov 14 14:27:34 (none) main: 3392270.47 MC I: RemoteParticipant::modeChanged(p=129, ch=2): ModesController wants to run mode: Video (2): vid-off 0x0@0.0 0k
Nov 14 14:27:34 (none) main: 3392270.47 MC I: RemoteParticipant::modeChanged(p=129, ch=3): ModesController wants to run mode: Video (3): vid-off 0x0@0.0 0k
Nov 14 14:27:34 (none) main: 3392270.47 MC I: Conference::calcCommonRate(c=1,ch=3) rate=0
Nov 14 14:27:34 (none) main: 3392270.47 MC I: RemoteParticipant::modeChanged(p=129, ch=4): ModesController wants to run mode: Data (4): data-off 0k
Nov 14 14:27:34 (none) main: 3392270.47 MC I: RemoteParticipant::setRRCap(p=129): Received new remote capset from protocol: Capability table:
Nov 14 14:27:34 (none) main: 3392270.47 MC I: RemoteParticipant::modeChanged(p=129, ch=1): ModesController wants to run mode: Audio (1): G.711mu 64k
Nov 14 14:27:34 (none) main: 3392270.48 H323Call I: h323_call::sendOutgoingModesToStack(p=129): Modes sent to stack: audio: G.711mu, video: vid-off, duo: vid-off, data: aud-off
Nov 14 14:27:34 (none) main: 3392270.57 H323Call I: h323_call_handler::handleH323CallCnf(p=129, s=1) Incoming call confirm rate=19200 lang='' dest=[h323Id='ARVATO' ]
Nov 14 14:27:34 (none) main: 3392270.57 MC I: RemoteParticipant::setRRRate(p=129): Received new remote rate from protocol: 1920000 (old: 0)
Nov 14 14:27:34 (none) main: 3392270.57 H323Call I: h323_call::sendOutgoingModesToStack(p=129): Modes sent to stack: audio: G.711mu, video: vid-off, duo: vid-off, data: aud-off
Nov 14 14:27:34 (none) main: 3392270.57 MC I: setCallState(p=129) InCall
Nov 14 14:27:34 (none) main: 3392270.58 H323Call I: h323_call_handler::handleH323TpeStringAvailableInd(p=129, s=1) Tpe string available indication
Nov 14 14:27:34 (none) main: 3392270.65 H323Call I: h323_call_handler::handleH323RtpOpenSessionReq(p=129, s=1) Open incoming media session (OLC/OLC-ACK, h233.chanid: 8: MC channel: 1)
Nov 14 14:27:34 (none) main: 3392270.66 H323Call I: h323_call_handler::handleH323RtpDecryptionKeyInd(p=129, s=1) Received decryption key (channel: 8)
Nov 14 14:27:34 (none) main: 3392270.66 H323Call I: h323_call_handler::handleH323IncMode: incoming mode
Nov 14 14:27:34 (none) main: 3392270.66 MC I: RemoteParticipant::configureIncomingChannel: Capability table:
Nov 14 14:27:34 (none) main: 3392270.67 DATACTRL I: DataGateCfgReq(ig=1) hdlc=yes
Nov 14 14:27:34 (none) main: 3392270.67 H323Call I: h323_call::configureIncomingChannelCnf(p=129) Receive media is set up for channel 8, sending confirm on open back to stack
Nov 14 14:27:34 (none) main: 3392270.67 H323Call I: h323_call_handler::handleH323RtpOpenSessionReq(p=129, s=1) Open incoming media session (OLC/OLC-ACK, h233.chanid: 7: MC channel: 2)
Nov 14 14:27:34 (none) main: 3392270.67 H323Call I: h323_call_handler::handleH323RtpDecryptionKeyInd(p=129, s=1) Received decryption key (channel: 7)
Nov 14 14:27:34 (none) main: 3392270.67 H323Call I: h323_call_handler::handleH323IncMode: incoming mode
Nov 14 14:27:34 (none) main: 3392270.68 MC I: RemoteParticipant::configureIncomingChannel: Capability table:
Nov 14 14:27:34 (none) main: 3392270.68 VIDEOCTRL-0 I: (proxy,161) maximum number of framestorage slices 2
Nov 14 14:27:34 (none) main: 3392270.70 MC I: VideoInputGateImpl::inputGateConfigState(ig=46): DecoderConfig[46]: maxMbps: 9000 maxWidth: 352 maxHeight: 288 memsize: 35348904
Nov 14 14:27:35 (none) main: 3392270.71 H323Call I: h323_call_handler::handleH323RtpOpenSessionReq(p=129, s=1) Open outgoing media session (OLC/OLC-ACK, h233.chanid: 1: MC channel: 1)
Nov 14 14:27:35 (none) main: 3392270.71 H323Call I: h323_call_handler::handleH323RtpEncryptionKeyInd(p=129, s=1) Received encryption key (channel: 1, h323.type: 1)
Nov 14 14:27:35 (none) main: 3392270.71 MC I: configureOutgoingChannel(p=129, ch=1): Configuring mode : Audio (1): G.711mu 0k PT(0) (modescontroller says real is: Audio (1): G.711mu 64k )
Nov 14 14:27:35 (none) main: 3392270.72 RTP I: Flux Start FEC Decoder sess: 0
Nov 14 14:27:35 (none) main: 3392270.74 RTP I: Rtp_Ready_doRTPSourceMuteReq(app=0,strm=5) source unmuted
Nov 14 14:27:35 (none) main: 3392270.74 H323Call I: h323_call::configureOutgoingChannelCnf(p=129) Outgoing media is set up for channel 1, sending confirm on open back to stack
Nov 14 14:27:35 (none) main: 3392270.74 H323Call I: h323_call::configureOutgoingChannelCnf(p=129) Sending mic mute indication on startup (channel: 1, type: 1)
Nov 14 14:27:35 (none) main: 3392270.74 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: audio, rtpaddress: rtp/rtcp 92.39.20.156:3230/92.39.20.156:3231 (fwtrav: mode: 0, keepaliveplno: 0, activertp: 0, activertcp: 0, RtpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, RtcpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, mode: Audio (1): G.711mu 0k PT(0) )
Nov 14 14:27:35 (none) main: 3392270.74 MC I: configureOutgoingChannel(p=129, ch=1): Configuring mode : Audio (1): G.711mu 0k PT(0) (modescontroller says real is: Audio (1): G.711mu 64k )
Nov 14 14:27:35 (none) main: 3392270.75 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: video, rtpaddress: rtp/rtcp /, mode: iX (0): undefined 0k )
Nov 14 14:27:35 (none) main: 3392270.75 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1)Got mode change on a channel that is not open (mediatype: 2)
Nov 14 14:27:35 (none) main: 3392270.75 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: duo, rtpaddress: rtp/rtcp /, mode: iX (0): undefined 0k )
Nov 14 14:27:35 (none) main: 3392270.75 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1)Got mode change on a channel that is not open (mediatype: 4)
Nov 14 14:27:35 (none) main: 3392270.75 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: data, rtpaddress: rtp/rtcp /, mode: iX (0): undefined 0k )
Nov 14 14:27:35 (none) main: 3392270.75 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1)Got mode change on a channel that is not open (mediatype: 3)
Nov 14 14:27:35 (none) main: 3392270.75 RTP I: Rtp_Ready_doRTPSourceMuteReq(app=0,strm=5) source unmuted
Nov 14 14:27:35 (none) main: 3392270.75 H323Call I: h323_call::configureOutgoingChannelCnf(p=129) Not sending openSessionCnf upon send mode change
Nov 14 14:27:35 (none) main: 3392270.76 H323Call I: h323_call_handler::handleH323MicOn(p=129, s=1) Mic on indication
Nov 14 14:27:35 (none) main: 3392270.76 MC I: ComasListener::recMicStatus(p=129) ON
Nov 14 14:27:35 (none) main: 3392270.76 MC I: RemoteParticipant::remoteMicStatus(p=129) unmuted
Nov 14 14:27:35 (none) main: 3392270.77 H323Call I: h323_call::configureIncomingChannelCnf(p=129) Receive media is set up for channel 7, sending confirm on open back to stack
Nov 14 14:27:35 (none) main: 3392270.78 RTP I: validateSSRC(sid=0) registering new ssrc (bbf62201)
Nov 14 14:27:35 (none) main: 3392270.79 MC I: RemoteInputGateImpl::setIncomingModeReport(ig=43,p=129) [Audio (1): G.711mu 64k ]
Nov 14 14:27:35 (none) main: 3392270.90 MC I: RemoteParticipant::reevalRefMode(p=129,ch=2) set ref [Video (2): vid-raw 1920x1080@30.0 0k ] q= motion, t60=921600
Nov 14 14:27:35 (none) main: 3392270.90 MC I: RemoteParticipant::modeChanged(p=129, ch=2): ModesController wants to run mode: Video (2): H.261 352x288@30.0 1856k
Nov 14 14:27:35 (none) main: 3392270.90 H323Call I: h323_call::sendOutgoingModesToStack(p=129): Modes sent to stack: audio: G.711mu, video: H.261, duo: vid-off, data: aud-off
Nov 14 14:27:35 (none) main: 3392270.90 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: audio, rtpaddress: rtp/rtcp 92.39.20.156:3230/92.39.20.156:3231 (fwtrav: mode: 0, keepaliveplno: 0, activertp: 0, activertcp: 0, RtpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, RtcpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, mode: Audio (1): G.711mu 0k PT(0) )
Nov 14 14:27:35 (none) main: 3392270.90 MC I: configureOutgoingChannel(p=129, ch=1): Configuring mode : Audio (1): G.711mu 0k PT(0) (modescontroller says real is: Audio (1): G.711mu 64k )
Nov 14 14:27:35 (none) main: 3392270.91 RTP I: Rtp_Ready_doRTPSourceMuteReq(app=0,strm=5) source unmuted
Nov 14 14:27:35 (none) main: 3392270.91 H323Call I: h323_call::configureOutgoingChannelCnf(p=129) Not sending openSessionCnf upon send mode change
Nov 14 14:27:35 (none) main: 3392270.97 H323Call I: h323_call_handler::handleH323RtpOpenSessionReq(p=129, s=1) Open outgoing media session (OLC/OLC-ACK, h233.chanid: 2: MC channel: 2)
Nov 14 14:27:35 (none) main: 3392270.98 H323Call I: h323_call_handler::handleH323RtpEncryptionKeyInd(p=129, s=1) Received encryption key (channel: 2, h323.type: 2)
Nov 14 14:27:35 (none) main: 3392270.98 MC I: configureOutgoingChannel(p=129, ch=2): Configuring mode : Video (2): H.261 0x0@0.0 0k PT(31) (modescontroller says real is: Video (2): H.261 352x288@30.0 1856k )
Nov 14 14:27:35 (none) main: 3392270.98 MediaStreamController I: creating Video Output Gate with diffServ=0
Nov 14 14:27:35 (none) main: 3392270.99 RTP I: RtpSession_FlowRateReq, (sid=0) rateInBitsPrSec = 1856000, inited = 1, remoteFecSupport = 0, fecIsSupportedLocal=1
Nov 14 14:27:35 (none) main: 3392270.99 RTP I: RtpSession_FlowRateReq, (sid=0) rateInBitsPrSec = 1856000, inited = 1, remoteFecSupport = 0, fecIsSupportedLocal=1
Nov 14 14:27:35 (none) main: 3392271.00 H323Call I: h323_call_handler::handleH323FlowControl(p=129, s=1) Received flow control on channel 'video' (rate: 1856000)
Nov 14 14:27:35 (none) main: 3392271.01 RTP I: TrafficCtrl: Used existing entry (main): id: 2, tcid: 65568
Nov 14 14:27:35 (none) main: 3392271.02 H323Call I: h323_call_handler::handleH323ExtendedFastUpdate(p=129, s=1) Remote requested extended fast picture update for video
Nov 14 14:27:35 (none) main: 3392271.02 MediaStreamController !ER MixerVideo::action: wrong state
Nov 14 14:27:35 (none) main: 3392271.29 MC I: RemoteParticipant::reevalRefMode(p=129,ch=2) set ref [Video (2): vid-raw 1920x1080@30.0 0k ] q= motion, t60=921600
Nov 14 14:27:35 (none) main: 3392271.36 H323Call I: h323_call::configureOutgoingChannelCnf(p=129) Outgoing media is set up for channel 2, sending confirm on open back to stack
Nov 14 14:27:35 (none) main: 3392271.36 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: audio, rtpaddress: rtp/rtcp 92.39.20.156:3230/92.39.20.156:3231 (fwtrav: mode: 0, keepaliveplno: 0, activertp: 0, activertcp: 0, RtpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, RtcpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, mode: Audio (1): G.711mu 0k PT(0) )
Nov 14 14:27:35 (none) main: 3392271.37 MC I: configureOutgoingChannel(p=129, ch=1): Configuring mode : Audio (1): G.711mu 0k PT(0) (modescontroller says real is: Audio (1): G.711mu 64k )
Nov 14 14:27:35 (none) main: 3392271.37 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: video, rtpaddress: rtp/rtcp 92.39.20.156:3232/92.39.20.156:3233 (fwtrav: mode: 0, keepaliveplno: 0, activertp: 0, activertcp: 0, RtpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, RtcpAddress: , Port: 0, InitialProbePresent: 0, InitialProbe: 0 0 0 0, KeepaliveProbe: 0 0 0 0, RetryIntervalPresent: 0, RetryInterval: 4294967295, RetryCntPresent: 0, RetryCount: 0, KeepaliveInterval: 4294967295, mode: Video (2): H.261 0x0@0.0 0k PT(31) )
Nov 14 14:27:35 (none) main: 3392271.37 MC I: configureOutgoingChannel(p=129, ch=2): Configuring mode : Video (2): H.261 0x0@0.0 0k PT(31) (modescontroller says real is: Video (2): H.261 352x288@30.0 1856k )
Nov 14 14:27:35 (none) main: 3392271.37 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: duo, rtpaddress: rtp/rtcp /, mode: iX (0): undefined 0k )
Nov 14 14:27:35 (none) main: 3392271.37 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1)Got mode change on a channel that is not open (mediatype: 4)
Nov 14 14:27:35 (none) main: 3392271.37 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1) Mode changed (mediatype: data, rtpaddress: rtp/rtcp /, mode: iX (0): undefined 0k )
Nov 14 14:27:35 (none) main: 3392271.37 H323Call I: h323_call_handler::handleH323_ModeCmd_Cnf(p=129, s=1)Got mode change on a channel that is not open (mediatype: 3)
Nov 14 14:27:35 (none) main: 3392271.38 RTP I: Rtp_Ready_doRTPSourceMuteReq(app=0,strm=5) source unmuted
Nov 14 14:27:35 (none) main: 3392271.38 RTP I: RtpSession_FlowRateReq, (sid=0) rateInBitsPrSec = 1856000, inited = 1, remoteFecSupport = 0, fecIsSupportedLocal=1
Nov 14 14:27:35 (none) main: 3392271.38 RTP I: RtpSession_FlowRateReq, (sid=2) rateInBitsPrSec = 1856000, inited = 1, remoteFecSupport = 0, fecIsSupportedLocal=1
Nov 14 14:27:35 (none) main: 3392271.38 H323Call I: h323_call::configureOutgoingChannelCnf(p=129) Not sending openSessionCnf upon send mode change
Nov 14 14:27:35 (none) main: 3392271.38 H323Call I: h323_call::configureOutgoingChannelCnf(p=129) Not sending openSessionCnf upon send mode change
Nov 14 14:27:36 (none) main: 3392271.81 RTP I: validateSSRC(sid=2) registering new ssrc (0b0afb01)
Nov 14 14:27:36 (none) main: 3392271.82 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
Nov 14 14:27:36 (none) main: 3392271.85 MC I: RemoteInputGateImpl::setIncomingModeReport(ig=46,p=129) [Video (2): H.261 352x288@0.0 0k ]
Nov 14 14:27:36 (none) main: 3392272.17 MediaStreamController I: MV::getVCSetting getOutputPortStatus initialized 1
Nov 14 14:27:36 (none) main: 3392272.17 MediaStreamController I: MV::getVCSetting localHwCookieHint_ 0 w 1280 h 720
Nov 14 14:27:36 (none) main: 3392272.17 MediaStreamController I: MV::getVCSetting getOutputPortStatus initialized 1
Nov 14 14:27:36 (none) main: 3392272.17 MediaStreamController I: MV::getVCSetting localHwCookieHint_ 8 w 1280 h 720
Nov 14 14:27:36 (none) main: 3392272.58 H323Call I: h323_call_handler::handleH323FlowControl(p=129, s=1) Received flow control on channel 'video' (rate: 1856000)
Nov 14 14:27:37 (none) main: 3392272.90 MC I: RemoteInputGateImpl::setIncomingModeReport(ig=46,p=129) [Video (2): H.261 352x288@24.97 0k ]
Nov 14 14:27:37 (none) main: 3392273.03 TxRateAdaption I: VideoOutputGateImpl::updateDownspeed(og=47): reportInital mediarate = 1856000 bit/s
Nov 14 14:27:37 (none) main: 3392273.03 RTP I: RtpSession_FlowRateReq, (sid=0) rateInBitsPrSec = 1856000, inited = 1, remoteFecSupport = 0, fecIsSupportedLocal=1
Nov 14 14:27:37 (none) main: 3392273.03 RTP I: RtpSession_FlowRateReq, (sid=2) rateInBitsPrSec = 1856000, inited = 1, remoteFecSupport = 0, fecIsSupportedLocal=1
Nov 14 14:27:38 (none) main: 3392274.02 H323Call I: h323_call_handler::handleH323ExtendedFastUpdate(p=129, s=1) Remote requested extended fast picture update for video
Nov 14 14:27:38 (none) main: 3392274.12 H323Call I: h323_call_handler::handleH323ExtendedFastUpdate(p=129, s=1) Remote requested extended fast picture update for video
Nov 14 14:27:38 (none) main: 3392274.46 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
Nov 14 14:27:40 (none) main: 3392276.01 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
Nov 14 14:27:40 (none) main: 3392276.54 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
Nov 14 14:27:41 (none) main: 3392277.66 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
Nov 14 14:27:48 (none) main: 3392283.98 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
Nov 14 14:27:49 (none) main: 3392285.42 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
Nov 14 14:27:50 (none) main: 3392285.94 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
Nov 14 14:27:52 (none) main: 3392288.49 MC I: RemoteParticipant::requestFastPictureUpdate(p=129,ch=2) inband
11-14-2012 10:38 AM
Hi,
Can you list the devices involved in the call with the Sx20? Is there a VCS, MCU, etc ?? What is the far end device where you're attempting to make the call?
The logs provided are definitely good but they do not contain the call debugging and hence it would not be possible to find out the root cause. Also we do not recommend customers to paste configuration and logs on this public forum. Hence, we can help you to check basic things first which could be wrong and if we see that it requires advanced troubleshooting, we would recommend you open a TAC case.
Regards,
Mubashshir Akhtar
11-15-2012 02:11 AM
thanks for reply.
there are no VCS/MCU or gatekeepers involved. Just using H323 to make direct external calls using ip address.
The other end is a either a Polycom VSX 7000 or HDX 7000.
Should have said we have two SX20 and two C40's and both the SX20's connect with audio only whereas the C40's connect correctly with audio and video. Obviously something has changed since they were working before. Its unlikely that a configuration change has been made on the local SX20 ( would any config changes be in a log file?), so i dont know if the remote endpoint has changed anything ( ie, would changing something like the h323 id or e164 possiby cause an issue on an SX20 but not on a C40).
So i was hoping someone might know if the SX20 behaves differently to the C40 in someway that might cause this or does the log file show the reason why no video is being sent/received?
08-09-2017 08:24 AM
Hi,
I 've had this issue before several times, there was two root causes encountered:
1- Video Codec mismatch
2- Not enough bandwidth for video hence the audio only
Check the video codecs on the participants and check if the video bandwidth is enough for this video call, try lowering the bitrate of the call and see if the issue is resolved.
Hope this will help.
Best regards,
Amine
03-09-2015 06:06 AM
Hi Mubashshir
I am having a similar no video in one direction problem.
Is there a document which details the common errors found in these logs files and what the fix could be?
This would reduce the number of TAC cases we have to log as this would help us to understand the log files.
Cheers
03-09-2015 12:25 PM
The basic rule is: deploy the endpoint with a call control and make sure no network element is messing with the signaling.
You will find many threads in this forum about missing media.
Besides that, if you need help, please open a new thread and clearly describe your issue.
Re-read your post before sending it and ask yourself if some one who does not know
anything about it would be able to understand it.
Please remember to rate helpful responses and identify
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide