Video call forawrding

[mo shea]

Hello,

We have a requirement to enable an operator to receive and answer video calls and forward it to the right video extension number. I am still a finding my way into Video concepts but would appreciate if some one could point me to the documentation / examples for this scenario or the logic behind it.

We are using CUCM 10.5.2, 5320 MCU, Expessway C and TMS

Thanks

Moe Shea

[Alok Jaiswal]

The forwarding should work the same way as you do for a normal voice call.  When you forward the voice call the original caller put on hold and then during the transfer media negotiation happens with new ip and port. So its pretty much the same thing.

Regards,

Alok