Video Jabber 4.7 is released

[ahmashar]

Hi All,

For those of you who were waiting for the release of video Jabber (Movi) 4.7 to resolve some of the issues you were facing in earlier version, now the wait is over.

you can download video Jabber (Movi) 4.7 from here:

http://software.cisco.com/download/release.html?mdfid=283613653&softwareid=280886992&release=4.7.4.17771

Enjoy!

Ahmad

[aostense · Accepted solution]

Resolved defects:

Identifier	Description
CSCuh57500	Screen saver is activated during the call (Mac)
CSCue83678	Jabber Video not registering to VCS with lower priority in SRV record
CSCuh73158	Documentation for support for Atom processors is inconsistent
CSCuf34508	Jabber Video fails to send video from integrated Lenovo camera in a call
CSCuh52513	No camera detected on OS X 10.9
CSCuh81078	No camera detected on Mid 2013 MacBook Air (shipped with OS X 10.8.4)
CSCuj71312	Wrong text string for built-in microphone on OS X
CSCuj59974	No audio, neither incoming nor outgoing, after microphone mute on Windows 7 and later
CSCuj50047	Low frame rate from Cisco cameras
CSCuj88210	CSEQ out of order for multiway

The full release notes can be downloaded here:

http://www.cisco.com/en/US/docs/telepresence/endpoint/Jabber_Video/4_7/JAB_BK_C94665B3_00_cisco-jabber-video-for-telepresence.pdf

/Arne

[Douglas Baggett]

Thanks! Is there some ETA when the free version of jabber at www.ciscojabbervideo.com will be updated? I sent an external user to download the free version to participate in a telepresence meeting and they got the old one.

[TGBXUser1]

4.7.4 prompts to "update" to 4.6.3.

[Alok Jaiswal]

Hi TG,

are you using enterprise jabber version or free jabber version?

Regards

Alok

[Douglas Baggett]

I had the same experience. I used the enterprise version of Jabber but put in the bootproxy address for the free version to get the free version of jabber working on 10.9.

That works, but when you launch 4.7 with the bootproxy address it asks if you want to upgrade to 4.6

[dpfitzp]

Hi there

The 4.7 release has rectified the camera resognition issue but I have another. I cannot access a conference bridge as the bridge does not recognise the # as the keyboard combination on the mac is Alt Shift 3. I also don't seem to be able to access a virtual keypad to overcome this issue. Any help greatly appreciated.

Regards
Dan

[Martin Koch]

Daniel: as this is a new question I would like you ask to open up a new message thread / question for it.

Please remember to rate helpful responses and identify helpful or correct answers.