cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
479
Views
0
Helpful
1
Replies

VOIP - Voice quality measurement

Hi all,

Is there any tools/commands available for Cisco 2621XM (2600 series), with which we can measure the voice quality of VOIP and TDM calls. Is it possible to get some statistical information about the voice call.

What are the metrics used by Cisco for measuring Voice Quality?

Any links, answers and suggestions would be helpful.

Thanks

1 Reply 1

Brandon Buffin
VIP Alumni
VIP Alumni

IP SLA is a feature built in to IOS and collects voice quality statistics. See the links below. There are also many 3rd party applications which will allow you to compile and analyze these statistics. Several of these are listed at the bottom of the first link below. The main metrics used to measure voice quality are latency, jitter, and packet loss in the network. IP SLA can also measure the MOS (Mean Opinion Score) which is a standard used across TDM and IP voice networks.

Cisco IOS IP Service Level Agreements for Voice over IP

http://www.cisco.com/en/US/tech/tk648/tk362/technologies_white_paper0900aecd801752ec.shtml

Monitoring Voice over IP Quality of Service

http://www.cisco.com/en/US/tech/tk543/tk759/technologies_tech_note09186a0080094bc3.shtml

Cisco IOS IP SLAs Configuration Guide

http://www.cisco.com/en/US/products/ps6350/products_configuration_guide_book09186a008043be2d.html

Hope this helps. If so, please rate the post.

Brandon

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: