02-24-2013 02:17 AM - edited 03-18-2019 12:39 AM
Hi,
I have sx20 connected to 2 identical screens (same size, same brand- sharp, same settings), but there is diffrences in the video color and resoulution and is not the same in both screens.
There is any explenation for that? and what i can do about it?
Thanks,
Shy
02-24-2013 02:34 AM
Hi Shy,
You can define those settings by logging into the codec's API via Telnet/SSH. Video Output settings are located as:
*c xConfiguration Video Output HDMI 1 Resolution: 1280_720_60
*c xConfiguration Video Output HDMI 1 OverscanLevel: None
*c xConfiguration Video Output HDMI 1 CEC Mode: Off
*c xConfiguration Video Output HDMI 1 MonitorRole: First
*c xConfiguration Video Output DVI 2 Resolution: 1024_768_60
*c xConfiguration Video Output DVI 2 OverscanLevel: None
*c xConfiguration Video Output DVI 2 MonitorRole: First
I ran the commands on a C60 and hence you see a DVI 2. In your case it would show HDMI 2 (I suppose). Run xconfiguration Video Output and you would see all the output settings and their resolution. You can change those settings there. Also if you want them to be identical I would also recommend having both the monitor roles set to First:
*c xConfiguration Video Output HDMI 1 MonitorRole: First
*c xConfiguration Video Output DVI 2 MonitorRole: First
Again in your case, it would be HDMI 2 instead of DVI 2.
Hope this answers your question.
Thanks
Mubashshir Akhtar
TelePresence Solution Group
02-24-2013 02:37 AM
Thanks,
I'll check it
02-26-2013 03:02 PM
Hi Shy,
Please mark this thread resolved if this fixed your issue.
Thanks
Mubashshir Akhtar
TelePresence Solution Group
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide