.
.
Hi, We have site that removed one of two power supplies from 7835 (model number: MCS7835H2-K9-CMA2) running CUCM 7.1.3 after it failed. The LED status now appears normal. My question is, should the LED indicate any type of alarm showing the power i...
Hi All,i have recently setup a Unity Connection systemVersion 8.5.1.10000-206I now want to give administration access to my helpdesk team to manage MACD's. I have given them the in-built role of "User Administrator". They have no issues creating voic...
Hey guys,I've got a new installation of Cisco Unified Presence, ver. 8.5.4. I'm trying to figure out where I can see, and hopefully adjust, how often Presence polls CUCM for updates. I know that in System>CUCM Publisher there is a small drop down tha...
Hi I have a customer runnig cucm 7.1.5 ,my customr have a vg224 that configured as sccp gw in the cucm and a 2811 router that connect to the pstn via e1 pri, the 2811 is configured as mgcp gw in the cucm .my problem is that is some cases we are no...
Hiused the following doc to change the IP address of a CUC sub and pub , however when changing the IP address in the OS admin page the system would reboot but return with the original address,i.e would ignore our new IP address.http://www.cisco.com/e...
I am importing users to CUC 8.6 from Unity 7. I used COBRAS to export and using COBRAS to import. I have moved 200+ users and I am getting the following error message on one user."The extension number conflicts with an existing object in the selected...
We are planning to upgrade our CUCM/CUC Ver 7.1.3 to Ver 8.6, as I know from Cisco documentations/Guide that we need to purchase UCSS-UCM & UCSS-MSG along with and attaching them to ESW contract. Currently we have attached servers details which also ...
Where can i find the GUI files for CME , i had configured the GUI on the router and when trying to access it on browser it gave me blank page. The GUI files are missing from the router flash memory.Please let me know from where i can download the GU...
The URL (http://www.cisco.com/cgi-bin/Software/Newsbuilder/Builder/VOICE.cgi) referenced for this tool in documentation is not found on Cisco's website. Any insight where it might have been moved to?Thanks,Mark
I have an issue with an office in the 919 area code where 911 is accidentally called on a regular basis. Once the caller realizes they dialed the wrong number they immediately hang up. The local PSAP then calls our trunk ID which is the same as our...
For some reason I can not add the intercom button to phone template in cucm 8.5
We just moved from Microsoft Communicator to Cisco Communicator. All is working fine and well as far as functionality with the application. However, there is one user that even with all the boxes checked and whatnot, her username/password/login ser...
Hello, we are using and cisco 2921 as an analog to SIP gateway. Calls from an very old key system come into the 2921 via an FXO port and are PLAR'd to the an Voip Dial peer configured with SIP to an IVR application. IF an user dials 0 to go to an ope...
I have a a Pub and 3 sub standalone servers all working fine.I am trying to add a 4 sub (have the licence) running on VMWare.The build has gone fine accept for getting the Sub authenicated to the PUB, the sub is defined on the PUB.I am getting the fo...
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:
Subject | Author | Posted |
---|---|---|
04-18-2024 04:56 PM | ||
04-17-2024 01:06 PM | ||
04-11-2024 03:24 PM | ||
04-09-2024 09:23 AM | ||
04-02-2024 03:27 AM |
User | Count |
---|---|
6 | |
5 | |
5 | |
2 | |
1 |