Without any warning from the client, my Attendant Console is apparently dropping out of service for about a minute, approx 5-10 times a day. I'm running CM 7.1.5 (just upgraded from 4.x) and the issue was happening with the old Call Manager. The on...
I am sending calls over a SIP Trunk to Unity and using Inband DTMF. Unity doesn't recognize the tones being sent if we use Inband. If we use RFC2833 it works fine. I would use RFC2833 for all but it causes more issues for certain SIP endpoints, ...
I'm trying to delete a user in Unity. When I hit delete, it looks like it deletes, but if I search for them again they are still there.I believe the Unity version is 4.0. There is an error in the log:-----------------------------------------------...
We use the Cisco Desktop Agent to sign in to CCX. There have been a few instances where a user forgets to logout of CDA and leaves for the day. There computer is locked and the managers need to log that person off so it doesn't screw with their sta...
Hi,I am upgrading Unity 4.2 to Unity Connection 7.0. Currently, we have Exchange 2003 severs with HBAs for SAN backup. If we reuse the MCS-7845, can I just put HBAs in them to support SAN backup???Thanks,Nelson
Trying to wrap my brain around how this would work. I have a need for a call handler that will automatically forward a call to an operator if they dont push any buttons. Seems like I could use "Route from next call routing rule" under greetings > A...
Hi to alli have here CUCM integrated with CUEwhen i call from one extension to other extension(localy) then everything works fineIf no ones answer then the call going to voice mail ...i can find the voice mail to the extension..everything working gre...
Hello,I have a problem only with certain types of laptop, is this: when I connect via VPN to the corporate network will Cisco IP Communicator version 7.0.x is only logged via ethernet, when I try to not register via wireless ... From my machine I ca...
Hi,does anyone know if it is possible to have the extension Mobility enabled automatically on autoreg phones (on the actual device) ?The only action i know off regarding this is to enable the service itself to the auto reg phone, but we still need t...
Hello - a customer is considering the deployment of Cisco C-Series UCS servers (M2) for virtualization of their UC server (2x Comm. Mgr, 1x Unity Connection, for now). These servers support four (4) virtual machines, so what I need to validate is wh...
Hi,Can anyone explain to me what Notify Presence Support (Phone provides SIP and SCCP Presence to Cisco Unified Presence) in the Cisco Unified Presence IP Phone Support Feature table at the link below means?http://www.cisco.com/en/US/docs/voice_ip_co...
Running Attendant Console with CUCM 6.1(3). The directory is being pulled from an LDAP source. The user can log into the application and search the directory based on Department codes. Information is presented. After some time the information wil...
I downloaded GUSI 2.0.3 today to troubleshoot Bug ID CSCti70702. The MAPI CDO version does not seem to be reported in this version of GUSI. Does anyone know what happened to it?
Dear AllI have to downgrade firmware of IP Phone 7945G as single Phone in order to testing I had an Issue with Phone designerMy Environment is CUCM (8.0.3.10000-8) , Firmware from SCCP45.9-0-3S - to SCCP45.8-5-4SI like to test only one phone BZ all ...
