Unified Communications Infrastructure

Dear all ,I know this is again a question to upgrade old unity server 4.03 to a new server Unity 7.x .I read a lot of thing on how to migrate a Unity system but as you know there is always some particularity.So my question is :what this the best migr...

Hi,I have a new install of h323 gateway with CUCM 7.X. I am testing with only one FXO voice port 0/3/0. Inbound calls work, but I cannot get outbound to work and CUCM is sending the correct digits to the H323 GW and it is matching the dial-peer. Numb...

I've starting a Presence project for one customer. After a first survey it seams that CUPC 8.0 have the possibility to:1 - Setup a Webex ad-hoc online meeting directly from the CUPC interface ?2 - Import personnal contact directly from Outlook, as th...

Are you ready for video in your enterprise? Sure, you've probably got the network all set up - beefed up your QoS and uplinks to the core switching. You've added bandwidth at the edge and blocked Youtube.com so corporate videos don't escape out onto ...

Hi,I am planning to upgrade the CUE from verison 2.2.2 to 2.3.4 because of the Script upload error and also there is no script editor avilable for version 2.2.2. I have gone through the upgrade procedure which requires below files:            – cue-v...

Does anyone know if there is a way to set the phone mode for CUPC 7.1(1.13850) when the software is deployed?  We want to deploy CUPC in deskphone mode on desktops and in softphone mode on laptops.I've examined the uclocal.xml and the UPC<user>.cnf.x...

Hi,I have a problem with doing a transfer from a CUC version 7.1 mailbox to a phone on the CUCM. Here's how it is set up:1) User Device Profile with line 2461640 has a Call Forward All to Voice Mail2) CUC mailbox 2461640 has a standard transfer set u...

Hello everyoneI'm trying to configure mwi for GDM and am not having much success. I tried a couple of different ways suggested in a discussion here:https://supportforums.cisco.com/message/3091135?tstart=0 but don't think I,m doing this the right way....

In planning for the future is it necessary to use CUBE and SME to connect PBXs with a SIP interface and PBXs with a H323/IP Trunk card?  Our CallManager dialing plan and overall design is solid however the many translations between the CUCM and PBXs ...

We are seeing an issue with the outlook CUPC client that is preventing users from dialing their contacts.If they go into their personel contact list, they can choose a contact, then use the CUPC drop down tool bar to select which number to dial (Busi...

Hello ,I have sucessfully installed Cisco Unified MeetingPlace Express 2.1.1.2 i can able to make audio/web conf .but i am unable to integrate with LDAPwhile i am testing LDAP configuration i am getting below error" Error while testing AXL configurat...