We are looking at upgrading our phones from a traditional PBX to Cisco IP. I am familiar with the CIsco IP and have deployed them before. However, the time I worked with them with overhead paging was a long time ago and was using unicast through an i...
Forum Posts
0-010-570-3006 DEFAULT OUTBOUND found this on an ISI report any ideas? Found other six digit calls as well (340944 Unassigned) anybody ran into this before? So I am running CUCM version 11.5.1.13902-2 Pub and Sub two locations PRI's at both location...
Hi, I am unable to get_file api to run currently. Attaching screenshots of request and response for reference.Request: Response : Also if I set the sftp flag to true in the request. I get this response: For any help, thanks in advance.
All, I am not too familiar with the licensing model, We do have an active collaboration flex subscription for the following UC Manager CUWL License (12.X)UC Manager Enhanced License (12.x)UC Manager Essential License (12.x)UC Manager Telepresence Roo...
Resolved! CUCM-Secure SIP Trunk
hi, I am facing the following error while configuring the secure SIP trunk security profile for the SIP trunk in CUCM Unified Communications Manager cluster is not licensed for Export Control functionality hence Device Security Mode Cannot be set as ...
I am running CUCM 12 and Unity 12. I have an issue where a call is not making it to voicemail. The call gets disconnected. Call flow is as follows: Auto Attendant--->option 1--->hunt pilot-->no answer-->DN on receptionist phone--->no answer--->differ...
Customer is requesting the following call manager configuration:1. Local 911 call routing2. Someway to do a three way group bridge that is initiated by the call to the 911 line. Expected behavior is this: Party A calls 911, parties B,C,D all receive ...
I am looking to forward a call with the ability to automatically forward with a caller input. Like 9xxxxxxxxxx,,,,,1 to go into a separate IVR we have for filling prescriptions. Is this something I can do in CCM or in unity?
I need to configure UCME to use a hunt group during the day, then voicemail. After hours and on weekends, can I make it go directly to the voicemail and bypass the hunt group? I've tried using a pilot number and the night-service, but it seems to ig...
We have multiple VG320 gateways with analog phones connected. Users try to pick up an analog phone to make an "overhead page" on the paging system. The user dials a couple digits and the call is routed to a 4300 voice gateway with an FXO port which s...
Hello, Can anyone tell me if there is a way to tell if personnel has set up their voicemail in Unity?
We're running Unity Connection 12.5.1.13900-35 and the customer has given us several hundred "Zero-Out's" to be added to voicemail and most of the new users coming up will be getting them as well. This leads me to two questions... First, is there a ...
Hi,I am in the process of creating new certs for our CUCM Cluster which are expiring in a month.In preparation : I wanted to upload the new Root CA ad new Sub CA in advance.Important remark (I think): the old and new CA's have the same Subject Field....
Hi, I am trying out the CDRonDemand API of the CUCM. But getting an error.Here is the request I am making. and the response I am getting. Some things to specify : 1) the get_file_list request is working fine, so I think the URL is correct.2) CUCM ver...
ITSP - (SIP) - CME - CUE (AA x3005) script w/redirect- CME (x1431 shared Line) Built a CUE AA script that has a call redirect function in it to x1431 an internal shared line. Calling the AA Pilot x3005 internal everything works fine audio all ways an...
