hi,my ccm version is 4.3.1.i wanted to install lattest dst patch on my server. can you please send me the links or any other informationRegards,stn
hi,my ccm version is 4.3.1.i wanted to install lattest dst patch on my server. can you please send me the links or any other informationRegards,stn
Friends,I am using CME 4.1 on 2811 router and registering IP communicator2.1.1.0with it. there are two problems i m facing that i thinkinterconnect witheach other. First, when i run ip communicator softphone, phone successfully registerwith cme but i...
System returned to ROM by power-onSystem restarted at 22:37:21 GMT Sun Sep 30 2007System image file is "flash:c3845-ipvoice_ivs-mz.124-13b.bin"Cisco 3845 (revision 1.0) with 1011712K/36864K bytes of memory.Processor board ID FHK1042F3R32 Gigabit Ethe...
i've got an ip 7920 that's set on do not disturb i checked on the phone menu the feature is not on it checked with the cme with sh ephone command and it showed it with DND WHAT COMMAND should i use with the command line on cme to take off the...
When I access Unity it comes up with a screen saying"Your Exchange Domain Account is associated with multiple Cisco Unity Subscribers. Please select the account you wish to log in." Is there a way to turn this screen off?
CUCM 4.2 Pub and SUB at main location additional Sub deployed at remote location. Also at remote location we have another CM Cluster deployed and connected via NGC intercluster Trunk. We are trying to migrate all the remote gateways and endpoints to ...
Is CUPS like CUCM in the sense that it will not install on a non-approved server, or is it like Unity which can be installed on just about anything?I have seen the CUPS hardware matrix so I know what is officially supported but I only need this for t...
We have a property management system interfaced to Unity through Percipia and the BellHop service. We're adding a new hotel property that has a different property management system and has a second Percipia server.Is it possible to run two instances ...
On Unity express 2.3 I cannot seem to get the original called number to takeeffect. It is still using last redirected number for VM. Have changed itback and forth serveral times with no success. I have not reload it yet but don't see why I should hav...
Calls are blocked to dn 1201. Route Plan Report shows all are correct.Dialed Number Analyzer shows dn is in some other partition that is not configured on the phone nor the dn configuration. 4 digit on-net calls from any remote site to this site get ...
We have a Meetingplace express 1.2 and I have system manager rights, how do I view a scheduled meetings password?Thanks,Andy
This is the first time I'm attempting to set up a conference bridge.I followed the "Conference Bridge Configuration Checklist" on my CCM 3.5:1. Configured a Hardware Conference Device and a Software Conference Device.2. Configured the Meet-Me Number/...
I'm trying to determine the CUE version we currently have. I have the Show Software Version output below. We are preparing for an upgrade and need to determine which path to approach. Installed Packages: - Installer 2.2.1 - Thirdparty 2.3.2 - Bootl...
Environment: 4 node cluster, with dedicated Pub and TFTP Server and 2 active Subscribers. We use a large quantity of Vg248s and 224s and have 2 PSTN gateways with 4 PRIs.I am having trouble getting OP to Monitor all the devices. I am well under the...
Hello Cisco family, I have a project to implement Cisco MeetingPlace. This is the first I have heard of this Cisco solution. Can someone please share with me some online information sources so that I can come up to speed on this product. Specific...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide
Subject | Author | Posted |
---|---|---|
04-18-2024 04:56 PM | ||
04-17-2024 01:06 PM | ||
04-11-2024 03:24 PM | ||
04-09-2024 09:23 AM | ||
04-02-2024 03:27 AM |
User | Count |
---|---|
7 | |
3 | |
3 | |
1 | |
1 |