Hi all, currently i am planning to do CUBE redundancy with HA.i've read this documentation:https://www.cisco.com/c/en/us/support/docs/voice-unified-communications/unified-border-element/112095-cube-hsrp-config-00.htmlOn that documentation, 2 CUBE con...
Forum Posts
Resolved! LogPartitionHighWaterMarkExceeded
Hello,upgraded our cluster to 12.5.1.12900-115.on 2 nodes, we get this LogPartitionHighWaterMarkExceeded and common partition usage disk is high (between 87 and 95).Files get purged but never go below 85-87 %.Tried to use the free common space cop no...
Resolved! Show wrong ANI during call
Hi ti all,in a customer environment, during a call from an IP phone to PSTN number, the ANI is not show correctly.Here all details:Calling number: 0644466580Called number: 3286214937ANI showed on receiver display: 064446 The steps are:Cisco phone -->...
Hi all,I have installed/configured a CSR1000v with IOS XE 16.09.05 using the default license and to function as a CUBE. Everything was working fine keeping into account that the total throughput of the box was 1Mbit due to no license was installed.On...
Unified CM Lines Without Phones in Ver: 10.5.2.12901-1 Unrestricted Hello Guys, I have phone lines not currently associated with physical phones. If I wanted to convert these lines to DID's can I just add refurbished phone equipment from a CISCO rese...
We need our cucm 11.5 SU7 to be upgraded to 12 because of some features and according to Document we are only able to upgrade to cucm 12.5 su2.On the other hand, we have Cisco QM 11.5 which is not compatible with cucm 12.5 and therefore we have reach...
Resolved! Error processing drive. (VMware)
Hi folks, Am installing CUCM 11. This is 1st time am getting error (attached snap). When system initiates installation, after entering credentials and details, system gives error. "Error processing drive. device may need to reinitialize. Reinitializ...
Hi i have an 8961 registered to CME 11.6 i have configured BLF speed dials and these work as they should . if i want to transfer a call i hit transfer it opens the new call window if i press one of my blf speed dial buttons it creates a second indep...
I'm familiar with the process to replace self-signed certificates with a trusted CA certificate on Cisco Voice OS servers. Just when I thought I had it all figured out, I generated a CSR from a CUCM publisher (tomcat, multiserver (SAN) selected to i...
hello i'm trying to install audio text manager to upload wav files to call handlers. I have tried this tool on windows 7, windows 2008 server and also windows 10 and keep getting the same error - see attached. i never had issues with odbc drivers whe...
Hi All, I have a CUCM cluster with 5 nodes (1 pub, 4 subscribers). But i have reverted snapshot of Publisher machine where only 2 subscribers are mentioned in server list in Publisher. So i just added subscriber details , but i see replication is not...
Resolved! Adding gateway to the CUCM 12.5
Hello;I'm a beginner in the collaboration world and started to learn from the basics. For this I installed CUCM 12.5 and now want to add some phones, gateways, etc to see the procedures and getting familiar with the workflow. I'm trying to add some g...
Good day community, We have a unity connect system that isn't online as of yet but through testing I found that when I call an extension that I have created on the system it plays a custom recording associated with the auto attendant which, was recor...
I upgraded our CUC 10.5 Cluster to 12.5su2 and now we are experiencing random burts of Jitter, but a constantly increasing Receiver Discarded packets counter while viewing the call statistics on a phone. As a result, the audio quality from CUC 12.5 ...
We have an isr4321-v/k9 to be installed with CUCME. I came to know that we need separate license for CME features. Can someone let me know about the licenses required or, where I can find the necessary details.
