Version:Cisco IOS Software, C2900 Software (C2900-UNIVERSALK9-M), Version 15.4(3)M3, call Flow: IP Phone (SCCP)---Diling out using---T1--> PSTN after one ring call getting Disconnected
I need to temporarily disable a number of Jabber users in bulk (and later enable them). It appears the GUI setting I need to toggle is either: End User Configuration / Service Settings / Enable User for Unified CM IM and Presence Or alternatively del...
HiI am working in an Organisation. We are having C814M-4X/K9 Router and Using GSM network BSNL -India ISP. We had a problem with the link is flapping and down for more time even the signal is showing normal RSSI = -70 dbm to -85 dbm. If the link is d...
i installed CUCM 12.5 And IM & Presence 12.5 and integrated them, i add external database (MS SQL) and i configured Message archiver Feature, when 2 online users chat together with cisco jabber 12.8 ,messages stored in database i defined, but i have...
Hi,In my customer's environment, the CUCM and CUC servers are configured with IPs as they didn't want to go for DNS. At that time there was no requirement of Jabber but due to Current Covid situation users have to work from home and use Jabber. But n...
Hello, we recently tried to raise a CUC V10.5 to 12.5. The upgrade was aborted by the system, not supported HW. Customer moved the CUC to another machine and it worked. Now we have to upgrade a CUCM V10.5 to 12.5 on the same machine, we can't move it...
Hi there,My customer has CUCM ver 10.5 and has mix of LDAP authenticated and Local End Users. Now, for a project we have to change Passwords of around 5000+ Local users. With BAT i am unable to do so as LDAP is enabled. I have opened a Cisco TAC Case...
We are in the process of testing disaster recovery for our CUCM infrastructure.
We did a backup of our current cucm publisher and wanted to restore it on another cucm server we built. The problem we are having is that when we try to initiate a restor...
I have a customer who doesn't want to increase their current OPEX and don't want to change to A-Flex plan, so they want to stay on Perpetual licenses, and they want to upgrade their current enhance licenses on version 11 to CUWL licenses. i tried to...
Hi Everyone,I am going to upload a Multi-SAN certificate for the first time in CUCM and CUC so need a small clarification please. I generated a CSR by selecting SAN in CUCM and CUC. Then I sent the CSRs to CA to get signed. Now, that I have received ...
hello friends, we have 3 clusters US, india and UK, with US being the busiest of 3 and hosts other integrations like UCCX, Zoom recording, microcall CDR, Expressyways for MRA, b2b and separate expressways for webex edge India and UK are pretty basic ...
Hi Team, Can we configure e-mail RTMT alert whenever the unity connection voice mail port is getting exhausted?I know the mechanism to check the voice mail port utilization in real-time from RTMT, but wandering if this could be done automatically. If...
Hello.New to the forums and a bit desperate. I've been searching for a solution but I don't even have the right search terms to explain my situation without writing a whole paragraph. Hopefully someone here can point me in the right direction. Here ...
I am going to decommission some of my BE6000 servers which used to host the collaboration VMs.If I do Reset settings under the KVM console from the CIMC, what all configurations will be removed -1. All predeployed VMs which came along with it?2. Vari...
