Unified Communications Infrastructure

I am trying to modify/change parameters in the SIP message. Was able to successfully modify the Originator "o" field and VIA field in the SIP messages using the below commands on the CUBE. The change i wanted to do was to replace the IP address in th...

admin:show version activeActive Master Version: 12.5.1.11900-146Active Version Installed Software Options:ciscocm.preUpgradeCheck-00024.cop 1.9 FAIL Test dataBase Sanity-" Standard Common Phone Profile " present in "commonphoneconfig" table.It is rec...

Does anyone know whether 4451 can be configured with the values of choice to use as payload numbers (types) in the SDP for initiated V.150.1 connections?

Can someone point me to documentation that explains how to enable (or allow only) V.150.1 on the 4451 IRS Router?We tried the steps described here: Cisco V.150.1 Minimum Essential Requirements Configuration Guide - Cisco but it does not work: For out...

I was wondering why the ciscounitytools.com web site shows "no" for all tools for Connection v14.  I used COBRAS export to download the database from a v11 cluster, and then used COBRAS import to upload to a new v14 cluster.  Everything worked as I e...

Preparing to upgrade CUCM 12.5 to 14 and ran the ciscocm.preUpgradeCheck-00033.cop.  Everything pass but database sanity check on the publisher.  I get the following message." administrator " present in "applicationuser" table. it is recommended to f...

one of my customer want to route the calls to voice gateway in call manager depend on calling number here is the scenario the call manager have many sites this sites in different country like USA and Mexico if someone in USA from usa want to make off...

Hello,We have an installation of CUC14 SU3 and we are getting the following error message when staff login for this one account.The maximum session limit for “User account name” has been reached. Logout one of the active sessions or contact Administr...

Hi, We received an request from one of our managers, they would like a staff member voicemail be copied to their voicemail box when they are received. I'm not finding any documents for this procedure only forwarding the voicemail.  Can anyone point m...

Hi,  I have CUCM 12.5, IMP 12.5, CUC 12.5 & CCX 12.0. I'm planning to do fresh install with data import for CUCM, IMP & CUC but I need to have the new installs to be on different IPs, hostnames & domain. is this doable? I previously have done "instal...