Unified Communications Infrastructure

Hi !! I´m working in a project with BE7000M, with Redudancy (2 x BE7000M). I´ve selected the CUCM 12.x with UCL Enh Licenses. Have I to duplicated the CUCM licenses and UCL Enh licenses or there is a way to share the license with the redundant BE7000...

Anyone install SU4 yet and experience " Bug Search Bug Search Tool - Cisco CCM service cores due to duplicate device register signal in a LineControl CSCvg50439" ?   In the defect it says the "cores seem to be around the time of a lot o...

We are using Cisco Unified CM Administration ver 7.1. I think this will be an easy one. I've done it before and need to do it again. Is there an easy way to adjust the time that appears on all our Cisco 7945 phones. It is out by a dozen of minutes......

Environment is 11.5 in cluster.   I have been asked to check if its possible to dial by first and last name. Currently, system is setup to accept first name only. If last name is spelled, system returns a message stating no user with that name. Is it...

Unity in cluster, version 11.5.   We have very simple after hours auto answer within Unity with a flat 4 options menu. I have to create secondary menu/tree for two  options from primary menu. I've made custom recordings for primary and secondary menu...

Hi Community   I registered an IP Phone 7841 in one of my call manager and it worked, but that brought me problems because there was no license for that model so I had to delete and restart the application to overcome the error. So far so good.Now I...

Recently we upgraded our Cisco Emergency Responder from 9.1 to 11.5.  The 9.1 is licensed but we don't know the PAK/licensing info which we need to get a new license for the 11.5 version.   We can still boot up the old CER 9.1 VM.  Is there a way to ...

There are a series of fields in the CUCM CMR record which are not documented in the Admin guide.  Can anyone tell me what these are?VerVoRxCodecCIDVoPktSizeMsVoPktLostVoPktDisVoOneWayDelayMs

Hello, How can I delete persistant chat room if I am administrator, but owner account of this chat room dismissed? For what purposes ctreates Group Chat System Administrators? Must this account have access to all chat rooms?

Hello every one i have issue in DTMF between the Cucm And Quescom GSM Gateway when  i use webex call me option  the call out from the quescom gateway and i resived it in Cell phone but the When i press 1 the webex didn't not responed i think it probl...

I have a situation with preservation mode, when on a conference call after 15min 8845 phone display preservation mode and disconnect the calls, the SRST Reference is disabled plus no issue with the MPLS circuits, any thoughts.

Hello team,   We have configured CISCO ATA 187 in office, it also registered in CUCM but no fax tone. So, please suggest me doing the TSHOOT this issue.   Thanks in Advance.   Regards Virendra P