HiCUCM version 11.5. We see errors in the dbreplication "runtimestate" output .When we looked into the output file we see this is related to "credentialdyanmic table". The Replication status however shows "2".We did run the repair table command and ...
Forum Posts
I want to know how the CUCM will come to know DTMF is pressed in in-Band DTMF like RTP-NTE is used and when it needs to introduce MTP to extract the DTMF to send it in signal channel. Since, RTP is end to end phone communication rather CUCM doesn't c...
Hey All,I am trying to set up a proof of concept in my lab for Ad Hoc Encrypted Conferencing using he Cisco Meeting Server as a Conference Resource in an MRG/MRGL set up. I have it pointed to a SIP Trunk to the SME in the Conference Bridge configurat...
I have a ISR 4321 Version 17.06.03a. Router has a NIM-2MFT-T1/E1 for PRI connection, this voice gateway will be a MGCP gateway controlled by a CUCM ver 12.5. Here you have my controller T1 0/1/0 config: controller T1 0/1/0framing esflinecode b8zscabl...
I have a request from the client that they need to play an announcement or message to the calling party when they call an extension ex (1124) and hunt pilot number (1200) . After that the call needs to get transferred or forwarded as required. How ca...
Resolved! Can ISR 4331/K9 use 8E1 * 2 ??
Hello, everyone I have a question, Voice Gateway Devie ISR4331/K9 have 2 slots, So, ISR 4331/K9 use NIM-8MFT-T1/E1 * 2??
Do I need to restart any services or reset phones after Updating QOS settings (in service parameter configuration) in a CUCM cluster on 11.5.1?
I'm trying to get an account for all the conference phones in community phones in our environment. I was told that it's possible to search for active phones with no assigned use. If so how? With. Dose anyone know the best way to go about doing this?
Hi Team, I have a plan to replace current VG from E1 to SIP. In current E1 RoutePettern config there are something like ; RP PRT GW/RL1234 A X >> To E1 >> RG= PSTN A,B,C 1234 B Y >> To E1 >> RG= PSTN C,B,A So, th...
Resolved! CUC and Expressway-C/E Resizing
Hi to everyone.https://www.cisco.com/c/dam/en/us/td/docs/voice_ip_comm/uc_system/virtualization/virtualization-software-requirements.html#resize_vmAccording to the above document it says that "Adding vCPU is supported for all apps except Unity Connec...
Resolved! IM&P VM Resizing ways
Hi guys.I've read many posts but unfortunately I did not come to a conclusion.I have the below scenarios of IM&P version 14 with 1,000 & 5,000 & 15,000 devices and I would like your opinion. Lets say I have a live and running IM&P version 14 VM with ...
We have a business requirement to have a AA menu input item dial a 1800 number to reach a service provider that we use for reporting an absence from work.I have researched how blocking works for 1800 numbers and have examined the partitions, route li...
Hi all, I have configure sip trunk between two cucm trunk is up but call is not happening. Please find details below Site A CUCM (pub+sub) 14.0 version Site B (pub+sub) 12.5 version Connection is given below SiteA CUCM >>firewall A >> site to Site V...
Resolved! Forward No Answer Service Parameter
HiWe have the Service Parameter "Forward No Answer" timer set to 21 secs.There is a DN which is configured for a group of users at location A. When the call is "Unanswerend" the call forwards to another set of users at location B.The ask is to forw...
I have two separate Unity systems. One in my lab running 90 days at a time and used mainly for training purposes and a production Unity system out in the field I'm getting ready to install that already has the smart licensing installed. In effort to ...
