Unified Communications Infrastructure

Resolved! Translation Rule Question

I have a question about a translation rule, I work for a law firm and we recently hired a new partner and we assigned him a number to an employee who has been here for a while. The extension is 2801 and I gave the long time employee 2091, he is upset...

Resolved! Extensions to use in Call manager10.5

What is the best recommended way to track extension usage in call manager 10.5 ? Or what would bet the best tool to use ? Thanks in a advance for any suggestions you may have -James

Conductor MRG on CUCM never register and rendezvous calls don´t work

I have a new implementation with CUCM 11, conductor XC4 and vTS 4.2(4.23). I create a CA to sign the certificates on CUCM and on Conductor and exchanged the certificates. and followed this document for the implementation http://www.cisco.com/c/dam/en...

Resolved! CUCM Security Password

Hi, I've recently 'inherited' support of a CUCM 8.5 cluster. I have the CUCM GUI and SSH passwords but no-one has been able to give me the security password. Is is possible to reset the security password and if so does changing it have any impact? ...

Resolved! UCM v11 Conference Now "invalid meeting ID"

Having some problems getting Conference Now to work with external callers over our SIP trunks. Callers hit the IVR just fine and hear the initial greeting and can enter the conference ID but then there is a long pause before they hear "The meeting n...

Resolved! Cisco CallManger 10.5 will show Ext Number Mask for internal call

experts, how to not show External Number Mask when make Internal call , so the other party can hit "Missed Call" and call back. A: 1002 (ext mask : 4254000) B: 1004 (ext mask : 4254000) When Phone A call Phone B, Phone B in "Missed call" will s...

Resolved! Cisco Expressway->SIP PSTN Calling

Hi All,I've just been doing some thinking about these technologies, and I wondered if this is possible?My understanding is that when a call is sent from expressway (Via B2B) using user@domain.com notation, it does a lookup for the SIP SRV Record for ...

BE6000 CUC

Hello, I have one doubt about deploying CUC: "If using two CPUs for Unity Connection, you may need to disable, or not use one of the other supported applications. The total number of CPUs used by active virtual machines must not exceed six." Our UCS ...

CIsco phones wont register for one user

Must of my users work from home and use ASA5505 to connect back to head office. We have one user where the ISP had to change the static IP. I updated it on the ASA and everything started working except now the desk phone and his IP comm wont regist...

CUCM and TelePresence Server Licensing

Hi every buddy I tried to understand new licensing concepts for both CUCM 10.x / 11.x and SMP/PMP instead of screen licences. here is my questions: 1. if i buy flowing SKU, how many device (IP Phone) i can register in the CUCM ? we can add devices ...

Cisco Prime - License Manager WebUI stuck at performing backup

Hello everyone, I have a Cisco Prime License Manager its WebUI is stuck at performing backup.Screenshot attached below.System version: 10.5.1.10000-7This is the only page displayed after logging in.Our backup is scheduled to run every Saturday but th...

Mobility Identity

Hi.I'm running Call Manager 8.6 and recently started testing the Cisco Jabber client - right now i'm working on my cell phone which is an android phone. We used to have single call reach enabled/configured through the Remote Destinations method - th...

UK Numbering Plan

Hi everyone I wanted to know can some give me some guidance on how to setup route patterns for the UK. I work for a law firm and we just merged with a London based office and we are setting up a CUCM server in that office. Thanks in advance for the h...

CUCM V8.6 - V11.X upgrade failure

Hi Folks, I'm trying to upgrade a cluster from 8.6 to v11 but failing - the process fails on the post-install phase - no indications on why. I have loaded all of the required COP files, rebooted the node and tried to change the VM settings in VMWare ...

Resolved! Question on CUBE Enterprise supported/recommended IOS version

Hello,I have a quick question on what is Cisco's recommended/supported IOS version for Cisco 4331, running CUBE Enterprise. The CUCM version is 9.1.2-10000-28 and currently the Cisco 4331 is running IOS 15.5(3)S1a.I tried to find a compatibility matr...

Unified Communications Infrastructure

Forum Posts

Resolved! Translation Rule Question

Resolved! Extensions to use in Call manager10.5

Conductor MRG on CUCM never register and rendezvous calls don´t work

Resolved! CUCM Security Password

Resolved! UCM v11 Conference Now "invalid meeting ID"

Resolved! Cisco CallManger 10.5 will show Ext Number Mask for internal call

Resolved! Cisco Expressway->SIP PSTN Calling

BE6000 CUC

CIsco phones wont register for one user

CUCM and TelePresence Server Licensing

Cisco Prime - License Manager WebUI stuck at performing backup

Mobility Identity

UK Numbering Plan

CUCM V8.6 - V11.X upgrade failure

Resolved! Question on CUBE Enterprise supported/recommended IOS version

Congratulations to the Event Top Contributors Class of 2024!

Cisco + Splunk: It's a new day for your data.

A new chapter of the Spotlight Award begins!

Join us in Celebrating the New Year and the Nov.-Jan. Winners!

Announcing Resources That Guide You to Success

Data Synchronization goes blank and RTMT

Extension Mobility problem

the incoming calls that are in the Attendant Console Standard queue

Webex - Expressway - Constant SIP Register and IP Changes

CS-DESKPRO-K9++ USB Control

Considerations in changing the minimum TLS version to 1.2 in CUCM 12.5

cucm 12.5 to 14

Where is a good source to learn what's new or different

Requirements of internal SRV records in internal DNS for a MRA deploy

Outgrown Dial Plan