BE6KS config issue

[laxminarayan_jutlawar1]

Hi 

I have configured BE6KS for data and voice users and it is working fine.

On my config issue is in router when i give a command of debug isdn q931 and remote monitor to check call logs but given this command i am not able to see the logs is there some issue with my configuration.

please find the attachment of running config for BE6KS.

[Aman Soi]

Hi Laxmi,

Did u enable terminal monitor on router ?

regds,

aman

[laxminarayan_jutlawar1]

Hi Aman,

Yes i enable terminal monitor on router not able to see the call logs.

[Aman Soi]

Is E1 0/0/0 controller UP ?

can u share show isdn status and show controller e1 0/0/0?

regds,

aman

[laxminarayan_jutlawar1]

Hi Aman,

Please find the attachment for your reference.

Regards

Laxminarayan

[Aman Soi]

Hi Laxmi,

Do u get any command like no logging monitor  ?

regds,

aman

[Aman Soi]

Hi LAxmi,

I checked the attached  router config and u have issued no logging monitor.

hostname EvolvenceRTR_IND
!
boot-start-marker
boot-end-marker
!
!
card type e1 0 0
logging buffered 1000000
no logging console
no logging monitor

can u make it logging monitor and check?

http://www.cisco.com/c/en/us/td/docs/ios/12_2/debug/command/reference/122debug/dbfintro.html#wp1017129

regds,

aman

[laxminarayan_jutlawar1]

Hi Aman,

It is possible after a week only Christmas  holiday is there.

I will check and let you know.

Thanks for your input.

[laxminarayan_jutlawar1]

Hi Aman,

I have configured the command and still it shows same same thing apart from this is there any configuration has to do changes.

Regards

Laxminarayan

[laxminarayan_jutlawar1]

Hi Aman,

yes now it's showing the calling party and the details.

As this site is very small and they are having only 7 users as you can check with configuration in show running command.

Is there any thing I can do more here as this site is good to learning me.

Does you have any document from where I can learn step by step configuration of cucm as I am since aware the theoretical knowledge on cum but practical hands on I don't have to much.

Once again thanks for the same please do share document.

Please find the attached latest file.

[Aman Soi]

Hi Laxmi,

you can refer the links

http://brezular.com/2014/01/13/voip-home-lab-part-1-8-cisco-unified-communication-manager-8-5-1-configuration/

https://supportforums.cisco.com/sites/default/files/legacy/9/4/4/67449-Cisco%20Unified%20Communications%20Manager%20%28CUCM%29%20-%20Basic%20Configuration%20for%20IP%20Phone%20Calls.pdf

regds,

aman

[laxminarayan_jutlawar1]

Hi Aman,

Thanks for the document shared I gone through it was good document for the basic configuration while initial starting the configuration.

Once again thanks for the reply and document.

+five

[laxminarayan_jutlawar1]

Hi Aman,

Forget to ask you one question in CUCM for ISD dialing by default 15 second time was there and now it change to 5 second but while dialing ISD still it is taken same 15 second time.

How can I change it to less time please share your suggestion.

Regards

Laxminarayan 

[Aman Soi]

https://supportforums.cisco.com/discussion/11039161/t302-timer

regds,

aman

[Aman Soi]

Hi Laxmi,

you can also refer the link

http://www.learncisco.net/courses/cucm-basics/cucm-basic-settings/starting-cucm-services.html

regds,

aman