cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
662
Views
0
Helpful
10
Replies

Exchange UM 2010 ingtration with callmanager 8.6

aibrahim.sallam
Beginner
Beginner

Dears,

I need your help i have been configured my exchange um server and call manager as the following topic

http://www.microsoft.com/en-us/download/details.aspx?id=13591

but when i tried to dial exchange polit number i got busy tone.

10 Replies 10

Post the SIP dialog and identify the calling/called party numbers, as well as the IPs of CUCM and the Exchange UM role server. We'll see if we can spot an issue and provide suggestions to address it if CUCM is at fault.

     Trunk Configuration      

5.PNG4.PNG1.PNG

2.PNG

3.PNG

Configuration

The Inbound Calls, Calling Search Space is < None >. Assuming yoru DNs and such are in partitions, you need a CSS and a reset of the trunk.

Please remember to rate helpful responses and identify helpful or correct answers.

I changed it but still same issue.

NOT THE CORRECT SETTING

That's the Incoming Calling Party Settings section, not Inbound Calls as I stated.

Please remember to rate helpful responses and identify helpful or correct answers.