10-29-2012 04:01 PM - edited 03-19-2019 05:48 AM
Hello,
I am trying to install CUCM 7.1 on HP Proliant DL 320 (2 x 500GB hard Drive, Dual-Core Intel (R) Xeon (TM) Processor 3.00 GHz/ 1333 MHz, 6MB L2) for a lab I'm trying to setup. When doing this, on CUCM 7.1, I get detecting server Hardware - this can take several minutes then it displays
Validation error on HSSI mode:
7825H4 Validation Failure:
7828H4 Validation Failure
CPU Speed Validation Mismatch: found [3.00GHz]
Memory Size Validation Mismatch: found [4 GB] expecting [8 GB]
Any help would be appreciated on this please.
10-30-2012 06:29 AM
Hi, did you check whether the HW is supported at all? You cannot just go and install CUCM on any server platform.
What I would do: go and install VMWare ESXi on the server and then install CUCM. For lab purposes, this would be alright.
G.
Sent from Cisco Technical Support iPad App
10-30-2012 08:54 AM
Hello,
I did check the list of Supported platforms and its listed in the same column as MCS 7825H4.
10-30-2012 06:55 AM
Check out this matrix for compatibility of servers vs CUCM versions:
Chris
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide