Following are the commands I used on CME for the integration
interface Integrated-Service-Engine0/0
ip unnumbered Loopback1
service-module ip address 10.1.9.1 255.255.255.252
service-module ip default-gateway 10.1.9.2
ip route 10.1.9.1 255.255.255.255 Integrated-Service-Engine0/0
interface Loopback1
ip address 10.1.9.2 255.255.255.252
telephony-service
srst mode auto-provision all
srst ephone template 1
srst dn template 1
srst dn line-mode octo
max-ephones 10
max-dn 10
ip source-address 10.1.4.1 port 2000
system message CME1861E
voicemail 2000
max-conferences 4 gain -6
web admin system name cisco password cisco
transfer-system full-consult
create cnf-files version-stamp 7960 Jan 02 2013 17:50:08
transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
dial-peer voice 300 voip
destination-pattern 2000
b2bua
session protocol sipv2
session target ipv4:10.1.9.1
dtmf-relay rtp-nte
Following are the commands used on unity express
ccn application voicemail aa
description "voicemail"
enabled
maxsessions 6
script "voicebrowser.aef"
parameter "uri" "http://localhost/voicemail/vxmlscripts/login.vxml"
parameter "logoutUri" "http://localhost/voicemail/vxmlscripts/mbxLogout.jsp"
end application
ccn trigger sip phonenumber 2000
application "voicemail"
enabled
locale "en_US"
maxsessions 6
end trigger
When Pressing the message button on the phone,its not routing to voicemail.instead there is a reorder tone.what could be the issu?
