Showing results for 
Search instead for 
Did you mean: 

mwi status light not working with cme 8865 phones




I have an interesting issue with my sip provider. I received the MWI status in the debug messages, however my phones do not light up for MWI. I have a stripped down configuration attached. I have heard its related to codecs, but I have my codecs in place. So perhaps someone can look at my config and potentially identify an issue that could cause the MWI from not lighting up on my sip phones. I am running CME only not CUCME.


Cisco IOS XE Software, Version 17.03.04a
Cisco IOS Software [Amsterdam], ISR Software (X86_64_LINUX_IOSD-UNIVERSALK9-M), Version 17.3.4a, RELEASE SOFTWARE (fc3)



1 Accepted Solution

Accepted Solutions

Change the DN 1002 to complete DID number and see if you are getting  the MWI working..



Response Signature

View solution in original post

14 Replies 14

Nithin Eluvathingal
VIP Mentor VIP Mentor
VIP Mentor

When integrating with CUE, we have to create MWI on and OFF number.


I dont think, your Provider can turn on the MWI lights.

AFAIK there is nothing called CUCME, it was always call manger express (CME).

Response Signature

With sip-ua I have configured mwi unsolicited ,in the debug outputs I see the # of voicemails and message waiting set to yes. Sorry, I meant CUCM , I am only running CME

Roger Kallberg
VIP Mentor VIP Mentor
VIP Mentor

Can you please explain what you mean by MWI in relation with your service provider? As @Nithin Eluvathingal wrote there are AFAIK no way that this could be controlled by the service provider for your phones.

If we’re missing the point here and you do have CUE for voice mail in your CME setup please provide us the details on that configuration.

Response Signature

There is no CUE, however my understanding that an unsolicited sip notify sets a flag on the mwi on the sip extension to trigger the mwi on/off status. My sip provider is call centric.