Hi,
I have been trying to upgrade our CUE from 8.5.4 to 8.6.4, but after the upgrade it is stuck in the below stage. Any help would be much appreciated.
Welcome to Cisco Service Engine
Power button monitor started
Setting the system time from hardware clock
********** rc.aesop ****************
Populating resource values from /etc/bryce_rsrc_file
attribute ios_rbcp/app_cookie_id exists
Populating resource values from /etc/default_rsrc_file
Populating resource values from /etc/products/cue/default_rsrc_file
Populating resource values from /etc/products/cue/bryce_rsrc_file
Processing manifests . . . . . . . . . . . . . complete
==> Management interface is eth0
==> Management interface is eth0
Serial Number: FOC15080XED
INIT: Entering runlevel: 2
********** rc.post_install ****************
INIT: Switching to runlevel: 4
INIT: Sending processes the TERM signal
==> Starting CDP
STARTED: ntp_startup.sh
STARTED: LDAP_startup.sh
STARTED: SQL_startup.sh
STARTED: dwnldr_startup.sh
STARTED: HTTP_startup.sh
STARTED: probe
STARTED: fndn_udins_wrapper
STARTED: superthread_startup.sh
STARTED: /usr/wfavvid/run-wfengine.sh
STARTED: /usr/bin/launch_ums.sh
Waiting 27 ...
Waiting 605 ...